Product Description:

The P80B22250HXP00 is a brushless servo motor produced by Sanyo Denki within the P8 Super BL Servo Motors series. As a standard-design BL motor, it supplies closed-loop rotary power for positioning axes, conveyors, and tool drives in industrial automation cells. The motor is intended to couple with a matching amplifier so that feedback-driven current generates precise torque and speed in applications requiring compact, sealed construction.

During continuous operation, the motor delivers a rated mechanical output of 2.5 kW at a rated speed of 2,000 rpm, producing a shaft torque of 12.0 N·m. To hold a static load, it can draw a continuous stall current of 22.4 A rms, developing 13.5 N·m without overheating. Short overload periods allow a peak stall torque of 30.0 N·m when 55.0 A rms flows through the windings. The low phase resistance of 0.056 Ω minimizes resistive losses, while the mechanical time constant of 1.1 ms supports rapid acceleration during indexing moves. These operating values suit mid-frame robots, material feeders, and tension controls that need steady torque with short bursts of extra force.

The motor reaches a maximum speed of 3,000 rpm and has a torque constant of 0.66 N·m/A rms, giving the controller a linear relationship between commanded current and output torque. Magnetic flux decays over an electrical time constant of 27 ms, enabling smooth transitions between current setpoints, while the IP67 enclosure protects the motor against dust and temporary immersion in water. A 220 mm square flange simplifies integration with gearboxes, and the sealed housing is supplied without a holding brake, so external clamping must secure vertical loads when power is removed. The rated armature current is 21.4 A rms during continuous operation. Its brushless construction eliminates brush replacement and reduces routine maintenance in high-cycle production environments.