P80B15075HXV00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P80B15075HXV00 is a brushless servo motor from the P8 Super BL Servo Motors series and features a flange size of 150 mm with IP67 protection. This standard motor delivers a rated output of 750 W, a rated torque of 3.6 N·m, and can reach speeds up to 3000 min-1. It is equipped with an absolute sensor (ABS-R II) and a built-in super-capacitor for enhanced reliability.
Internal Product Review
The P80B15075HXV00 is a Sanyo Denki P8 Super BL servo motor with brushless motor technology and a rated output of 750 W. Rated torque of 3.6 N·m and peak stall torque of 9.0 N·m support confident servo performance through acceleration and load changes. IP67 protection and an absolute sensor (ABS-R II) make the unit a strong choice for precise motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P80B15075HXV00 is a brushless servo motor from Sanyo Denki’s P8 Super BL Servo Motors series. It is intended for industrial automation axes that require repeatable position and speed control in packaging machines, pick-and-place actuators, and similar equipment. Its brushless design reduces mechanical wear associated with commutators and supports precise motion when paired with a compatible servo drive. The motor can be used for applications involving frequent acceleration, controlled deceleration, and steady operation under changing loads.
At its rated operating point, the motor supplies 750 W of mechanical power while turning at 2,000 rpm and generating 3.6 N·m of torque. Its continuous stall torque is 3.7 N·m, allowing it to hold static loads without exceeding its thermal capacity under approved operating conditions. The motor tolerates momentary overloads up to a peak stall torque of 9.0 N·m. Transient operation is supported by a peak current of 13.9 A RMS, while normal operation draws 5.2 A RMS from the drive. The phase resistance is 0.44 Ω, and the electrical time constant is 13 ms. Speed and position feedback are provided by an ABS-R II absolute sensor, while the back-EMF gradient is 27.0 mV per rpm. The rotor inertia is 5.3 × 10⁻⁴ kg·m², the torque constant is 0.78 N·m/A RMS, and the maximum mechanical speed is 3,000 rpm.
A 150 mm square flange supports installation with compatible planetary gearboxes and machine mounting surfaces. The housing has an IP67 rating, which protects the interior against dust and temporary water immersion when the motor is installed correctly. Absolute position data are retained during a power loss by a built-in supercapacitor, eliminating the need for a backup battery. The motor is supplied without a holding brake, so an external mechanism must secure vertical or suspended loads when power is removed. Its power rate is 25 kW/s, indicating its ability to change speed rapidly during short motion cycles. Thermal loading is managed through the standard motor frame, which transfers internally generated heat to the surrounding structure and air.
