P60B22700SCS12 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B22700SCS12 is a brushless servo motor from the P6 Super BL Servo Motors series with a rated output of 7.0 kW and a rated torque of 67.0 Nm. It operates at a maximum speed of 1000 min-1 and features a 220 mm flange size with a wiring-saved incremental encoder offering 2,000 P/R resolution. The motor is equipped with a holding brake that uses 24V and 1.7 A for excitation.
Internal Product Review
The P60B22700SCS12 is a Sanyo Denki brushless servo motor rated for 7.0 kW output. Rated torque of 67.0 N·m and instantaneous max stall torque of 150.0 N·m give the motor strong authority in demanding axis applications. The wiring-saved incremental encoder with 2,000 P/R resolution adds precise feedback performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B22700SCS12 is a brushless servo motor produced by Sanyo Denki for the P6 Super BL Servo Motors series. As a brushless motor actuator, it converts drive current into precise rotary motion for indexing tables, gantry axes, and other CNC or packaging equipment that requires repeatable torque at low speed. The unit is supplied with an integral holding brake, so vertical loads can be retained during power loss. A wiring-saving incremental encoder supplies position feedback to the drive without requiring additional cabling.
This model uses a 220 mm flange that mates directly with large gearboxes or machine frames. It is rated for a continuous shaft output of 7.0 kW, allowing the drive to supply significant mechanical power without thermal derating. Under nominal conditions, the shaft delivers a constant 67.0 N·m while turning at a rated speed of 1,000 rpm. The armature windings draw a steady 31.3 A RMS at this operating point, which helps determine fuse sizing and cable ampacity. The brushless design minimizes wear associated with mechanical commutation, and the phase resistance of 0.063 Ω helps keep copper losses low. A detector resolution of 2,000 pulses per revolution allows the controller to measure movement in increments of 0.18 degrees.
For applications requiring higher momentary torque, the motor can sustain 70.0 N·m continuously at stall and withstand peaks of up to 150.0 N·m when axes accelerate or decelerate abruptly. The continuous stall torque corresponds to a current of 32.4 A RMS and remains subject to the stator’s thermal limits. A torque constant of 2.32 N·m/A RMS relates commanded current to produced torque, supporting accurate drive adjustment. The holding brake engages at 24 V and requires 1.7 A of excitation current. The encoder’s wiring-saving format reduces the required connector count, which simplifies cable routing inside the machine and control panel.
