P60B22700SCS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B22700SCS00 is a standard motor in the P6 Super BL Servo Motors series and uses brushless technology. It has a flange size of 220 millimeters and is equipped with a 24V holding brake. The motor features a wiring-saved incremental encoder and supports a maximum speed of 1000 min-1.
Internal Product Review
The P60B22700SCS00 is a Sanyo Denki P6 Super BL servo motor with brushless motor technology and a standard motor design. A wiring-saved incremental encoder and 1000 min-1 max speed support efficient feedback and steady motion control. An equipped holding brake with 24 V brake voltage makes this unit a strong choice for controlled stopping and secure axis holding.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B22700SCS00 is a servo actuator manufactured by Sanyo Denki and supplied through its P6 Super BL Servo Motors series. This brushless AC motor is intended for closed-loop position or velocity control in factory automation cells, pick-and-place modules, and other motion axes that benefit from high torque at low speed. As part of a drive system, it converts electrical power from a matching amplifier into mechanical rotation so controllers can move connected loads with repeatable accuracy. Electronic commutation and integrated feedback allow the amplifier to regulate shaft movement without relying on mechanical switching components.
The frame uses a 220 mm square flange that mates directly with heavy gearboxes or precision couplings without adapter plates. A factory-installed holding brake keeps vertical or overhung loads stationary when motor power is removed. The brake is energized by a dedicated 24 V supply from the controller panel. During operation, the rotor can reach a peak speed of 1000 rpm, which establishes the upper operating range for the connected drive and mechanical load. The brushless motor design uses electronic commutation, eliminating brush wear and supporting continuous operation in clean or dusty industrial environments. Its large flange provides a stable mounting surface for applications that place substantial torque or inertia on the actuator.
The feedback section integrates a wiring-saving incremental encoder that carries power and signals through a single connector, reducing harness complexity while providing high-resolution position data to the amplifier. The simplified connection arrangement reduces the number of separate conductors that must be routed between the actuator and drive cabinet. This model is a standard motor, so its shaft, key, and mounting dimensions follow the baseline configuration for this motor type rather than a custom arrangement. The P6 motor designation identifies its compatibility group within the related servo platform. The encoder supplies the motion data needed for closed-loop correction of position and velocity during acceleration, steady movement, and deceleration. The holding brake and encoder perform separate functions, allowing the motor to maintain stationary loads while still supporting precise feedback during powered operation.
