P60B2211KBXSA3 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P60B2211KBXSA3 is part of the P6 Super BL Servo Motors series and uses brushless motor technology. This servo motor features a 220 mm flange size, a mass of 67.5 kg, and a wiring-saved incremental encoder with a 2,000 P/R resolution. It offers a rated output of 11 kW, a rated speed of 1,500 min^-1, and a peak torque of 181 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B2211KBXSA3 is a brushless servo motor produced by Sanyo Denki for the P6 Super BL Servo Motors series. Within automated machinery, the motor converts drive controller commands into accurately regulated shaft motion, making it suitable for positioning tables, packaging lines, and synchronized conveyors that require repeatable torque and speed. Its brushless design eliminates commutator wear and reduces the need for routine motor maintenance.
A reduced-wiring incremental encoder supplies real-time feedback, and its resolution of 2,000 P/R allows the controller to detect shaft increments of 0.18 degrees for precise closed-loop control. The motor has an electrical time constant of 39 ms, which indicates the current rise period through the stator windings. Its phase resistance is 0.0155 ohm, helping limit copper losses during continuous operation. Rated output reaches 11 kW at 1,500 rpm, while continuous torque is 70.0 N·m for demanding motion axes. The motor has a 220 mm flange for mounting to a compatible machine frame or drive assembly. Rotor inertia is 225 × 10⁻⁴ kg·m², allowing acceleration commands to remain controllable without excessive overshoot.
The motor has no holding brake, so static load retention must be provided by external mechanics or drive-generated torque. It can withstand transient loads up to a peak torque of 181 N·m, while its rated current is 51 Arms. The maximum speed is 2,000 rpm, and the back-EMF voltage constant is 51.5 mV/rpm. A mechanical time constant of 0.53 ms supports a rapid response to speed commands, while the stall torque is 88.3 N·m for low-speed holding loads. The motor has a mass of 67.5 kg, which must be considered when sizing mounting structures, gantries, or vertical axes. Its torque constant is 1.48 N·m/Arms and relates phase current to shaft torque during drive tuning.
