P60B18550RBV00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P60B18550RBV00 is a standard brushless motor from the P6 Super BL Servo Motors series with a rated output of 5.5 kW and a rated torque of 35.0 N·m. It features a flange size of 180 mm, an IP67 protection method, and comes equipped with a holding brake operating at 90V. The motor uses a permanent magnet excitation system, has an insulation grade of F, and includes a built-in super-capacitor.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B18550RBV00 is a brushless servo motor manufactured by Sanyo Denki for the P6 Super BL Servo Motors series. This standard motor uses a permanent-magnet excitation system to convert electrical energy into controlled mechanical rotation for positioning and speed-regulation tasks in automated machinery. An integrated ABS-R II absolute sensor allows a compatible controller to read the multi-turn shaft position after a power cycle without requiring the axis to complete a new homing sequence.
This model delivers a continuous mechanical output of 5.5 kW at a rated shaft torque of 35.0 N·m while drawing 32 Arms from the drive. Its maximum operating speed is 2500 rpm, providing additional speed range for high-throughput axes before the drive reaches its voltage limits. A torque constant of 1.18 N·m/Arms indicates the proportional increase in developed torque as motor current rises. The phase armature resistance is 0.040 Ω, which helps limit copper losses during continuous current flow. F-class winding insulation provides the thermal margin needed for operation within the motor’s permitted load range. Instantaneous load demands are supported by a stall torque of 88.3 N·m, while an induced-voltage constant of 41.2 mV/rpm indicates the back electromotive force generated as shaft speed increases. The insulation system withstands 1500 VAC for one minute between the windings and frame, and the brushless design eliminates mechanical commutator wear.
The enclosure has an ingress protection rating of IP67, allowing installation in locations exposed to dust or washdown water. The square housing attaches to machinery through a 180 mm flange, providing a rigid interface for alignment with a gearbox or machine mounting plate. Its keyed output shaft has a diameter of 42 mm and provides positive torque transmission to a coupling, pulley, or similar driven component. A factory-installed holding brake operates at 90 V and locks the rotor when power is removed, helping prevent an unsupported load from moving. A built-in supercapacitor maintains the energy needed to release the brake during brief power interruptions.
