P60B18450RBVT2E Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P60B18450RBVT2E is part of the P6 Super BL Servo Motors series and utilizes brushless motor technology. It features an absolute sensor (ABS-R II) detector and comes with an IP67 protection system. The motor provides a rated output of 4.5 kW, a rated torque of 21.5 Nm, and is equipped with a super-capacitor and holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B18450RBVT2E servo motor is manufactured by Sanyo Denki as a member of the P6 Super BL Servo Motors series. This brushless unit integrates a holding brake and carries the CE mark for regulated installations. It employs an ABS-R II absolute sensor for position feedback, allowing controllers to recover multi-turn position data without homing. In automated conveyors, indexing tables, and forming equipment, it converts electrical power into controlled rotary motion and torque with fast response and repeatable accuracy.
At its rated operating point, the motor delivers 21.5 N·m of continuous torque at 1,500 rpm while drawing 24.9 Arms from the drive. The windings can provide a continuous stall torque of 32.0 N·m and briefly deliver an instantaneous peak torque of 70.0 N·m without magnetic saturation. Fast transients are supplied by a peak armature current of 81.2 Arms. The winding resistance is limited to 0.052 Ω, so the voltage drop remains low. Speed regulation extends to a maximum speed of 2,500 rpm, and the electrical time constant of 23 ms supports a quick current rise. A 90 V brake coil locks the shaft when power is removed, and an internal supercapacitor preserves feedback data during shutdown.
The motor has a mechanical power rating of 4.5 kW, delivered through a 180 mm square flange that mates directly with reducers or couplings. Each ampere supplied to the windings produces 1.03 N·m/Arms of torque, and the back-EMF constant is 36.0 mV per rpm, simplifying parameter entry in servo amplifiers. A rotor inertia of 47.1 × 10⁻⁴ kg·m² balances dynamic acceleration with load smoothing, while the sealed housing has an ingress protection rating of IP67 for washdown areas or outdoor installations.
