P60B18450MXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P60B18450MXS00 is a brushless servo motor that belongs to the P6 Super BL Servo Motors series. This standard motor features a flange size of 180 mm and an overall length of 192 mm, with a rated output of 4.5 kW and a maximum speed of 1500 min-1. It is equipped with an IP67 fully closed, self-cooled protection method and uses a wiring-saved incremental encoder with a resolution of 2,000 P/R.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B18450MXS00 is a brushless servo motor built by Sanyo Denki for the P6 Super BL Servo Motors series. As a flange-mounted drive, it supplies closed-loop torque and speed control to positioning tables, packaging axes, and other automation systems that rely on precise electrical rotation rather than mechanical gearing. The motor uses a permanent-magnet excitation system and a standard design without a holding brake, so external equipment must provide static locking when the shaft is stationary. Its brushless configuration reduces wear associated with mechanical commutation and supports consistent operation during repetitive positioning cycles.
The unit is rated for 4.5 kW of continuous mechanical output and sustains shaft rotation at speeds up to 1500 rpm. Feedback resolution is fixed at 2,000 P/R, allowing the controller to issue positional commands in increments of 0.18 degrees. The standardized 180 mm flange size provides a broad mounting surface for securing the motor to compatible machine frames. The fully enclosed housing is self-cooled and carries an IP67 ingress protection rating, which protects the stator from dust and temporary water immersion. Natural heat dissipation through the housing eliminates the need for a separate cooling fan during normal operation. The motor is intended for continuous duty, making it suitable for applications that require sustained torque and repeated axis movement.
The Class F insulation system permits winding temperatures up to 155 °C and helps protect the internal conductors during continuous operation. The stator withstands a dielectric test potential of 1,500 VAC for one minute, demonstrating electrical isolation between energized components and the motor housing. Rotor position is detected by a wiring-saving incremental encoder, which reduces the required connector wiring and communicates position data to the drive’s digital interface. The motor has an overall length of 192 mm, keeping the required installation depth moderate while accommodating the internal rotor and feedback assembly. A built-in seal helps prevent lubricant from escaping along the shaft. The V15 vibration grade supports stable operation under continuous duty, while the flange mounting arrangement anchors the motor directly to the machine without requiring additional mounting plates.
