P60B18350LXF2A Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B18350LXF2A is a brushless servo motor from the P6 Super BL Servo Motors series. It features a rated output of 3.5 kW, a rated speed of 2,000 min-1, and a rated torque of 17.0 Nm. The motor has a 180 mm flange size, an overall length of 169 mm, and is IP67 rated for protection.
Internal Product Review
The P60B18350LXF2A is a Sanyo Denki P6 Super BL servo motor with brushless motor technology for precise motion applications. A 3.5 kW rating and 2,000 min-1 rated speed support smooth, responsive performance in demanding servo duty. A 50.0 N·m peak stall torque and IP67 protection make this unit especially attractive for harsh industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B18350LXF2A is an AC servo motor built by Sanyo Denki for the P6 Super BL Servo Motors series. Intended for industrial automation, it converts commanded current into rapid, precise rotation for gantry axes, feeders, and similar motion stations. Brushless motor technology eliminates brush wear and keeps feedback signals stable during extended production cycles, enabling accurate position and speed control under changing load conditions.
During continuous duty, the motor supplies 3.5 kW of mechanical power at a rated speed of 2,000 rpm. It produces a rated torque of 17.0 N·m while the drive delivers a phase current of 26.4 Arms. The sealed enclosure has an IP67 protection rating, preventing dust entry and protecting the motor against temporary water immersion. A flange size of 180 mm anchors the unit, and the overall length is 169 mm, providing a compact package for equipment with limited installation depth. The shaft is 35 mm in diameter, allowing direct coupling to midrange gearboxes or pulleys. The motor has a 19 ms electrical time constant and a 0.89 ms mechanical time constant, allowing torque to build quickly after a current step. Phase resistance is 0.048 Ω, which helps minimize copper losses. The unit is supplied without a holding brake, so external clamping or servo torque must maintain the load position when required.
Short-term overload capacity includes a peak stall torque of 50.0 N·m, allowing the axis to absorb abrupt process disturbances without stalling. When acceleration commands are issued, a torque constant of 0.75 N·m/Arms translates drive current into usable shaft torque. A rotor inertia of 34.1 × 10⁻⁴ kg·m² provides a balance between responsiveness and stability during changes in speed. The motor can reach a maximum speed of 3,000 rpm for fast repositioning. Its installed dimension is 200 mm, which helps confirm the required clearance inside a machine frame.
