P60B18350HBS28 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P60B18350HBS28 is a brushless motor from the P6 Super BL Servo Motors series with a rated output of 3.5 kW and a flange size of 180 mm. It features a wiring-saved incremental encoder with a resolution of 2000 P/R and is equipped with a holding brake that delivers a brake holding torque of 32.0 N·m. This motor has a protection rating of IP67 and can achieve a maximum speed of 3000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B18350HBS28 is a brushless servo motor manufactured by Sanyo Denki within the P6 Super BL Servo Motors series. This compact, high-power rotary actuator supports closed-loop speed and position control for industrial automation. It is suited to indexing tables, packaging axes, and gantry drives where fast response and repeatable accuracy are required. Its brushless construction eliminates commutator wear, supporting longer service intervals in machinery that operates through frequent motion cycles.
The motor has a rated output of 3.5 kW. To sustain this workload, it draws a phase current of 26.4 A RMS while turning at a rated speed of 2000 rpm and producing a continuous shaft torque of 17.0 N·m. The IP67 enclosure prevents dust from entering and protects internal components against temporary water immersion under the applicable test conditions. A 180 mm square flange provides a standardized mounting face for rigid attachment to a machine frame. The wire-saving incremental encoder produces 2,000 pulses per revolution, allowing the drive to close position loops without external sensors. The motor also has a stall torque of 22 N·m and a torque constant of 0.75 N·m/A RMS. Its phase resistance is 0.048 Ω, which helps limit electrical losses during current-to-torque conversion.
For transient demands, the motor can deliver a peak torque of 50.0 N·m and accept a surge current of 80.2 A RMS without demagnetization. These capabilities support short acceleration periods and rapid changes in mechanical load while the servo drive regulates current. An integrated holding brake supplies 32.0 N·m of static torque at a coil voltage of 90 V, preventing the load from driving the shaft backward when motor power is removed. The maximum rotational speed is 3,000 rpm, providing additional speed for rapid positioning moves within the motor’s operating limit. Encoder feedback allows the connected drive to monitor shaft movement and correct position or speed deviations during operation. Typical applications include conveyor diverters, robotic joints, and material-forming equipment that require precise motion under high-duty operating cycles.
