P60B18200HXVT2 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B18200HXVT2 is a brushless servo motor from the P6 Super BL Servo Motors series, featuring a 180 mm flange size and an absolute sensor for detection. It has a rated output of 2000 W, delivers a continuous stall torque of 12.0 Nm, and achieves a maximum speed of 3000 min-1. This model includes a built-in super-capacitor and can provide an instantaneous current of 48.7 Arms.
Internal Product Review
The P60B18200HXVT2 is a Sanyo Denki P6 Super BL servo motor with 2000 W rated output and 9.5 N·m rated torque. Brushless motor technology and an Absolute sensor (ABS-R II) support responsive control and dependable position feedback in motion applications. A strong choice for demanding servo axes, highlighted by 30.0 N·m instantaneous stall torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B18200HXVT2 is a brushless AC servo motor produced by Sanyo Denki within the P6 Super BL Servo Motors series. The motor supplies closed-loop rotary power for positioning axes, indexing tables, and other automated machinery that requires repeatable torque at moderate speeds. A built-in supercapacitor supports the drive’s power-loss ride-through function, limiting downtime during power disturbances and allowing the axis to stop in a controlled manner. This arrangement is useful in automated processes where an abrupt loss of motion control could interrupt a production sequence or leave the connected mechanism out of position.
At stall, the motor can deliver a continuous torque of 12.0 N·m while dissipating heat through its 180 mm flange housing. Under rated operating conditions, the shaft supplies 9.5 N·m at 2,000 rpm, producing 2 kW of mechanical power for medium-inertia actuators. The motor provides an instantaneous stall torque of 30.0 N·m for brief acceleration and load changes. Its peak mechanical speed is 3,000 rpm, providing additional speed range above the rated operating point. With a power rate of 42 kW/s and a mechanical time constant of 0.94 ms, the rotor accelerates rapidly for short motion cycles in pick-and-place equipment or servo press applications.
The phase windings carry a continuous stall current of 17.0 Arms and may draw up to 48.7 Arms during momentary peak demand, while the rated operating current is 14.6 Arms. Low copper losses result from a resistance of 0.079 Ω per phase, and the electrical time constant of 20 ms supports stable current regulation by the drive amplifier. A torque constant of 0.74 N·m/Arms relates commanded current to the torque produced by the motor. The induced voltage constant is 25.7 mV per rpm, providing the back-electromotive-force scaling used by the connected drive. Position feedback is provided by an ABS-R II absolute sensor, allowing the controller to retain shaft position information. The motor has no holding brake, so an external locking mechanism or drive-applied torque is required to secure the shaft when power is removed.
