P60B13200LCX2U Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P60B13200LCX2U is a brushless servo motor from the P6 Super BL Servo Motors series with a rated output of 2000 W and an IP67 protection rating. It features a 130 mm flange size, a 28 mm shaft diameter, and is equipped with a holding brake that operates at 24V. The motor supports a continuous time rating and uses a permanent magnet excitation system.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B13200LCX2U is a brushless servo motor produced by Sanyo Denki in the P6 Super BL Servo Motors series. This permanent-magnet unit converts electrical input from a matching drive into controlled rotary motion for positioning tables, feeders, or packaging axes that demand repeatable torque and speed regulation. By pairing with P6 servo amplifiers, the motor supports tight current loops and high-resolution feedback so that machine controllers can apply precise motion profiles during continuous industrial operation.
The electrical section is matched to an amplifier capacity of 100 A, ensuring that the stator windings can receive the peak phase current required for rapid acceleration without thermal derating. Continuous mechanical output reaches 2000 W, which is the sustained power that can be delivered to the load. A spring-applied brake energized at 24 V secures the shaft when power is removed, preventing drift on vertical or load-holding axes. The housing has a square flange measuring 130 mm, allowing direct coupling to gearheads or mounting plates that follow common IEC dimensions. The enclosure has an IP67 protection rating, making it dust-tight and resistant to water ingress during washdown or outdoor service.
The motor withstands 1,500 VAC for one minute, indicating adequate clearance between live parts and the grounded frame. The overall motor length is 171 mm, and the output shaft has a diameter of 28 mm for keyed couplings or rigid disks. The motor uses Class F insulation, which supports winding temperatures up to 155 °C and is suitable for its continuous duty rating and V15 vibration grade. A factory-installed shaft seal limits the entry of contaminants around the shaft. The flange-type installation arrangement supports rigid attachment to compatible machine surfaces while maintaining accurate alignment with the driven equipment.
