P60B13200LCX2C Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B13200LCX2C is a brushless servo motor from the P6 Super BL Servo Motors series with a rated output of 2000 W and flange size of 130 mm. It features a self-cooled, fully enclosed design, an IP67 protection rating, and is equipped with a holding brake. This motor operates with a 100 A amplifier capacity and uses a permanent magnet excitation system.
Internal Product Review
The P60B13200LCX2C is a P6 Super BL servo motor rated for 2000 W and continuous duty. Self-cooled operation and a fully closed enclosure support dependable performance in demanding industrial installations. IP67 protection and a 24 V holding brake make the motor especially attractive for sealed motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B13200LCX2C is a brushless AC servo motor supplied by Sanyo Denki in the P6 Super BL Servo Motors series. Intended for positioning duties in automated assembly stations and material-handling axes, it combines a permanent-magnet rotor with electronic commutation to deliver rapid, repeatable motion. An integrated holding brake keeps the shaft locked during power loss, supporting vertical loads and controlled stops on production equipment.
Its electrical interface is compatible with drives that have an amplifier capacity of 100 A, providing the peak phase current needed during acceleration. The integrated brake releases at 24 V, simplifying connection to standard control power buses. Thermal management relies on a self-cooled frame, so airflow over the housing dissipates losses without external blowers. Coil insulation withstands 1,500 VAC for one minute, and insulation resistance remains above 10 MΩ when tested at 500 VDC, limiting leakage current in humid environments. The housing meets IP67 ingress protection, and the fully enclosed housing isolates internal components from airborne oil mist. Under continuous-duty operation, the motor supplies 2000 W of mechanical output, allowing direct coupling to gearboxes or pulleys without overloading the windings.
The motor uses a flange mounting interface with a mounting face that spans 130 mm, providing a suitable footprint for gear reducers or machine plates. A keyed shaft with a nominal diameter of 28 mm transmits torque, and an internal seal at the output end helps prevent coolant ingress. The total body length is 171 mm, so the assembly fits inside compact axis carriages where space is limited. Dynamic balance conforms to the V15 vibration grade to minimize oscillations transmitted to connected equipment under load. The flange and keyed shaft permit rigid attachment while maintaining alignment between the motor and the driven mechanism. Its compact body length also reduces the space required behind the mounting plate without altering the shaft interface.
