Product Description:

The P60B13200L0X2C is a brushless servo motor produced by Sanyo Denki within the P6 Super BL Servo Motors series. This P6 motor uses permanent-magnet brushless technology to provide closed-loop rotational control for indexing tables, packaging lines, and other industrial automation axes that demand repeatable positioning and speed regulation. When paired with a compatible drive, the unit converts electrical current into controlled torque, allowing precise acceleration and load holding without mechanical gearing.

At its continuous operating point, the motor delivers 2000 W of mechanical power while turning at 2,000 rpm, producing 9.5 N·m of rated shaft torque. That torque results from a winding current of 15.5 Arms and a torque constant of 0.69 N·m/Arms, providing a clear current-to-torque relationship. The winding has a phase resistance of 0.10 Ω, and its inductive response has an electrical time constant of 12 ms, which helps determine suitable current-loop bandwidth settings. The enclosure has an IP67 protection rating, allowing washdown installation when the mating connectors are properly fitted. A mechanical time constant of 0.75 ms indicates that the rotor can change speed rapidly. The power rate of 77 kW/s indicates how quickly the motor can convert energy during dynamic motion profiles.

The motor provides a stall torque of 12.0 N·m and a peak stall torque of 30.0 N·m, giving it additional torque for acceleration and disturbance rejection. When speed control rather than holding torque is critical, the motor can reach a maximum velocity of 3,000 rpm, provided the drive remains within the voltage constant of 24.1 mV per rpm. The round shaft has a diameter of 28 mm and is supported by a 130 mm square flange, allowing the frame to align with compatible IEC mounting patterns. The compact mechanical interface also permits the motor to transmit substantial torque in installations with limited mounting space.