Product Description:

The P60B13200HBV0B is a brushless AC servo motor manufactured by Sanyo Denki for the P6 Super BL Servo Motors series. It combines brushless motor technology with an ABS-R II absolute sensor to provide closed-loop position data to motion controllers in packaging lines, pick-and-place modules, and other industrial automation axes that require repeatable velocity and torque regulation. The absolute sensor retains position information during power interruptions, eliminating the need to perform a homing sequence after power is restored. A built-in supercapacitor supports this power-off position retention without requiring an external battery. The motor also includes a factory-installed holding brake that secures the shaft when brake power is removed. A dedicated 90 V brake supply releases the mechanical clamp during normal operation so the shaft can rotate freely.

The motor reaches a maximum shaft speed of 3000 rpm, while its continuous operating speed is 2000 rpm. At the continuous operating point, it provides a rated output of 2000 W and produces 9.5 N·m of rated torque. The drive must supply 15.5 Arms at this load. For short-duration motion, the motor can sustain 12.0 N·m and reach a peak stall torque of 30.0 N·m. Its torque constant is 0.69 N·m/Arms, relating the applied phase current to the resulting shaft torque. The rotor inertia is 12.1 × 10⁻⁴ kg·m², which affects acceleration and deceleration under changing loads. A voltage constant of 24.1 mV/rpm indicates the back electromotive force generated as rotational speed increases.

The housing has an IP67 rating, protecting the internal components against dust and temporary water immersion when the motor is installed correctly. Each phase has a resistance of 0.10 Ω, and the electrical time constant is 12 ms. These electrical characteristics influence current-loop response and the rate at which winding current changes after the drive applies voltage. The three-phase winding arrangement supports controlled torque production through electronic commutation. A square flange measuring 130 mm supports direct attachment to compatible machine plates or gearboxes. The flange provides a stable mounting surface that helps maintain shaft alignment under radial and axial loading. The absolute detector supplies position data immediately after startup, while the holding brake prevents an unpowered axis from drifting when the connected load applies torque to the shaft.