P60B13200HBV00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P60B13200HBV00 is a brushless servo motor in the P6 Super BL Servo Motors series. It features a rated output of 2000 W, a rated speed of 2,000 min-1, and a flange size of 130 mm. The motor is equipped with an absolute sensor, super-capacitor, and a holding brake, while its rated current is 15.5 Arms and its rated torque is 9.5 N m.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B13200HBV00 is a brushless servo motor produced by Sanyo Denki for the P6 Super BL Servo Motors series. As a standard motor that incorporates brushless technology, it converts drive commands into precise rotary motion for positioning tables, pick-and-place arms, and other automated axes. The built-in ABS-R II absolute sensor provides continuous position feedback to the drive controller. An internal supercapacitor preserves position data during brief power outages, allowing the axis to resume operation without performing another homing cycle. This feedback arrangement supports applications that require immediate position information after power is restored.
This model delivers a rated mechanical output of 2000 W at a nominal speed of 2,000 rpm, producing a continuous shaft torque of 9.5 N·m with a rated current of 15.5 Arms. Copper losses are limited by a phase resistance of 0.10 Ω, and current rises to its commanded value within an electrical time constant of 12 ms. The brushless motor has a torque constant of 0.69 N·m/Arms and a back-EMF voltage constant of 24.1 mV/rpm. An integrated 90 V holding brake engages when power is removed, helping secure vertical or load-bearing axes. The brake provides power-off shaft retention without changing the motor’s normal closed-loop operation while the drive is energized.
At stall, the stator can continuously carry 18.3 Arms and produce 12.0 N·m of torque. For brief acceleration demands, the drive system permits a peak current of 52.4 Arms and a short-term peak torque of 30.0 N·m. These overload capacities allow the motor to accelerate demanding loads while the selected drive limits current to protect the windings. The output shaft has a diameter of 28 mm, providing a substantial interface for compatible couplings and gearheads. A square 130 mm flange supports rigid attachment to planetary gearheads, machine plates, or direct-drive assemblies. The rotor can reach a maximum speed of 3,000 rpm for rapid indexing moves above the nominal operating speed.
