P60B13200BXS0E Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B13200BXS0E is a servo motor from the P6 Super BL Servo Motors series with a rated output of 2000 W and a maximum speed of 2000 min-1. This brushless motor features a 130 mm flange, a 28 mm shaft diameter, and an IP67 ingress protection rating. It uses a self-cooled system with a wiring-saved incremental encoder of 2,000 P/R resolution and has an F type insulation grade.
Internal Product Review
The P60B13200BXS0E is a Sanyo Denki brushless servo motor rated for 2000 W with continuous duty. Self-cooled construction and IP67 protection support dependable operation in demanding automation environments. A wiring-saved incremental encoder with 2,000 P/R resolution gives this motor strong positioning accuracy for precise motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B13200BXS0E is a brushless servo motor manufactured by Sanyo Denki for the P6 Super BL Servo Motors series. Its permanent-magnet excitation and flange-type installation allow direct coupling to gearboxes or machinery frames without adapter plates. Intended for industrial automation, the motor supplies closed-loop torque and speed control for pick-and-place axes, feeders, and other positioning tasks where compact size and low maintenance are priorities. The brushless design eliminates mechanical commutation, reducing wear during repeated positioning cycles and sustained speed-controlled operation.
The motor provides a rated output of 2000 W, giving two kilowatts of continuous mechanical power at the shaft. Position feedback comes from a wire-saving incremental encoder with a resolution of 2,000 P/R, supporting fine commutation and accurate position tracking by the drive. A flange outer dimension of 130 mm supports direct installation on compatible machine interfaces. The motor has an ingress protection rating of IP67, which prevents dust entry and protects the enclosure during temporary water immersion. Its self-cooled frame dissipates heat through ambient airflow without requiring an external blower. The motor has no holding brake, so the drive or an external clamp must maintain the load position when power is removed. It supports continuous-duty operation, allowing it to remain energized under its rated load. The distance from the flange face to the shaft end is 145 mm, which supports installation in compact mounting spaces.
Peak mechanical speed reaches 2000 rpm, enabling moderate-speed point-to-point moves without requiring an oversized transmission. A shaft diameter of 28 mm transmits torque through keyed couplings while helping limit rotational inertia. The windings use a Class F insulation system designed to tolerate thermal cycling during continuous service. The insulation withstands 1,500 VAC of dielectric stress for one minute, providing electrical isolation between the windings and grounded frame. The motor has an overall length of 171 mm, allowing its torque-producing components to fit within a compact axial envelope. Its permanent-magnet rotor supports responsive acceleration, while the incremental encoder supplies the feedback needed for controlled torque, speed, and position. The absence of brushes and a commutator reduces routine maintenance during the motor’s operating life.
