Product Description:

The P60B13150HCX23 servo motor is built by Sanyo Denki within the P6 Super BL Servo Motors series. This brushless unit supplies closed-loop rotary actuation for indexing tables, pick-and-place arms, and similar motion axes in industrial automation. Its three-phase stator works with permanent magnets to deliver consistent torque, while a factory-installed holding brake keeps loads locked whenever power is removed—an advantage on vertical or suspended equipment where drift must be prevented. Paired with a digital drive, the motor maintains position control and short cycle times across repetitive production tasks.

At its continuous operating point, the motor supplies 1500 W of mechanical output while turning at 2,000 rpm. That speed corresponds to a rated shaft torque of 7.5 N·m, providing the rotary force needed for medium-duty conveyors, carton sealers, or cam followers. To reach this operating range, the windings draw 9.4 Arms from the amplifier, and the torque constant is approximately 0.90 N·m/Arms. A low phase resistance of 0.27 Ω limits resistive losses so the stator can sustain the current without excessive heating. The brushless construction removes mechanical commutation components and reduces routine maintenance requirements.

For short bursts, the drive may command 26.5 Arms, producing a peak stall torque of 20.0 N·m to overcome static friction or accelerate inertial loads. Rotor inertia is 8.3 × 10⁻⁴ kg·m², a moderate value that balances quick response with stable speed regulation. Mechanical mounting follows the IEC square-flange pattern, and the flange face measures 130 mm. A 22 mm shaft transmits power through keyed couplings. The integrated brake operates at 24 V, draws 0.86 A, and provides 9.0 N·m of holding torque when the axis is idle. A maximum no-load speed of 3000 rpm broadens the usable range for rapid indexing cycles, while a continuous stall torque of 9.0 N·m supports steady low-speed operation.