P60B13150HCSA3 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B13150HCSA3 is a servo motor from the P6 Super BL Servo Motors series, featuring brushless technology and a 130 mm flange size. It provides a rated output of 1500 W, a continuous stall torque of 9.0 N·m, and operates at a rated speed of 2,000 min-1. This model includes a holding brake, a wiring-saved incremental encoder with 2,000 P/R resolution, and has IP67 protection.
Internal Product Review
The P60B13150HCSA3 is a Sanyo Denki brushless servo motor with 1500 W rated output and IP67 protection. Rated torque of 7.5 N m and max speed of 3000 min-1 give the motor strong motion performance for demanding axis applications. The wiring-saved incremental encoder with 2,000 P/R supports clean feedback integration, making the motor an excellent high-performance choice.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B13150HCSA3 is a brushless AC servo motor manufactured by Sanyo Denki within the P6 Super BL Servo Motors series. Intended for precision industrial axes, it translates electrical commands from a servo amplifier into repeatable rotary movement for pick-and-place units, feeders, and gantry systems. Its controlled motion supports vertically oriented stages and other applications where the connected load must remain secure when control power is removed. The brushless design also avoids the wear associated with mechanical commutation, which supports consistent operation during frequent positioning cycles.
The rated mechanical output is 1500 W, produced at a nominal operating speed of 2,000 rpm and a shaft torque of 7.5 N·m. Continuous stall torque reaches 9.0 N·m, allowing the axis to resist a load without overheating when stopped, while a peak stall torque of 20.0 N·m provides additional capacity for rapid acceleration. The drive supplies 9.4 Arms of armature current through windings with a phase resistance of 0.27 Ω and an electrical time constant of 10 ms. Position feedback is provided by a reduced-wiring incremental encoder with a resolution of 2,000 pulses per revolution, simplifying cabling to the control cabinet. The integrated holding brake uses a 24 V coil that draws 0.86 A and clamps the rotor during power loss or an emergency stop.
The motor mounts on a 130 mm square flange and turns a 22 mm shaft. Its rotor inertia of 8.3 × 10⁻⁴ kg·m² balances responsiveness with stability during changes in speed and direction. A torque constant of 0.90 N·m/Arms supports predictable conversion of armature current into shaft torque. The housing is sealed to IP67, protecting the internal components against dust and temporary water immersion. This protection supports operation in washdown areas or high-humidity zones where coolant and airborne contaminants may be present. The rotor can reach a maximum speed of 3000 rpm, providing additional speed range for dynamic cycles beyond the nominal operating point. The compact flange and protected housing allow the motor to fit machinery with limited mounting space and demanding operating conditions.
