P60B13150HBVAB Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B13150HBVAB is part of the P6 Super BL Servo Motors series and features a rated output of 1500 W with a rated speed of 2000 min-1. This brushless motor delivers a rated torque of 7.5 N·m, with a peak stall torque of 20.0 N·m, and includes a holding brake with 9.0 N·m brake holding torque. It is equipped with an absolute sensor (ABS-R II) detector, has a flange size of 130 mm, and a built-in super-capacitor.
Internal Product Review
The P60B13150HBVAB is a Sanyo Denki P6 Super BL servo motor with 1500 W rated output and 7.5 N·m rated torque. Brushless motor technology and the ABS-R II absolute sensor give this motor excellent control accuracy and consistent feedback quality. A 9.0 N·m holding brake adds strong axis retention, making this servo motor a highly capable motion solution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B13150HBVAB is manufactured by Sanyo Denki for the P6 Super BL Servo Motors series. This brushless servo motor provides closed-loop motion for industrial automation equipment such as indexing tables and pick-and-place gantries. Its ABS-R II absolute sensor supplies direct position feedback, allowing the connected drive to track the shaft position without requiring a homing cycle after normal startup. The motor also includes a holding brake that secures vertical or suspended loads when brake power is removed. A supercapacitor is built into the feedback system to preserve absolute-position data during interruptions to the main power supply.
The motor mounts to machinery with a 130 mm square flange, and it is rated for 1500 W of continuous mechanical output. At its rated operating point, the motor develops 7.5 N·m of torque at 2,000 rpm while drawing 9.4 A RMS from the servo drive. These operating values indicate the continuous load that the motor can support while keeping the winding temperature within its insulation limits. A continuous stall torque of 9.0 N·m supports applications that require substantial torque at zero speed. The rotor inertia is 8.3 × 10⁻⁴ kg·m², while the mechanical and electrical time constants are 0.82 ms and 10 ms, respectively. These response characteristics permit rapid acceleration while helping the drive maintain stable current regulation. The brushless design and a back-EMF constant of 31.4 mV/(min⁻¹) support smooth sine-wave commutation.
For intermittent acceleration, the motor provides a peak stall torque of 20.0 N·m and can reach a maximum speed of 3,000 rpm. The connected servo drive must remain within these limits when commanding rapid indexing moves or responding to changing loads. The copper windings have a phase resistance of 0.27 Ω, which affects current rise and heat generation during operation. A torque constant of 0.90 N·m/A RMS allows the controller to calculate approximate output torque from the measured motor current. The holding brake releases when supplied with 0.25 A at 90 V and applies 9.0 N·m of holding torque when de-energized. This brake is intended to hold a stationary load rather than stop repeated high-speed motion.
