Product Description:

The P60B13150BBS0JE is a servo motor manufactured by Sanyo Denki for the P6 Super BL Servo Motors series. This component converts electrical energy into controlled mechanical rotation for positioning tasks in industrial automation equipment such as pick-and-place heads, indexing tables, and packaging axes. When coupled to a compatible drive, the motor supports closed-loop speed and torque control so that machine controllers can synchronize motion with sensors and downstream processes while requiring less maintenance than brushed designs.

The motor delivers continuous mechanical power of 1500 W, allowing medium-capacity actuators to accelerate payloads without requiring an oversized drive. Its maximum shaft speed is 2000 rpm, providing the rotational velocity needed for rapid point-to-point moves before field weakening occurs. A square flange measuring 130 mm on each side provides a standardized mounting interface that aligns with gearboxes and machine frames in the 130 class. The motor uses a brushless design that eliminates commutator wear and supports demanding duty cycles. The holding circuit operates with a 90 V coil, so the brake power supply or drive output must provide this voltage for proper operation.

Torque retention during a power loss is provided by an integrated holding brake, preventing vertical or reciprocating loads from drifting. The assembly bears the CE mark, indicating conformity with applicable European safety and electromagnetic compatibility directives when correctly installed. Position feedback comes from an incremental encoder with reduced wiring, which simplifies cable routing while providing high-resolution pulse trains for servo control. The encoder data and brake connections integrate with compatible Sanyo Denki drives that support the motor’s electrical interface and pinout. This arrangement allows the drive to monitor rotor movement and regulate commanded motion without requiring an excessive number of feedback conductors.