P60B13100HXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P60B13100HXS00 is part of the P6 Super BL Servo Motors series and features a brushless, permanent magnet excitation system. This standard motor has a 130 mm flange size and weighs 6.6 kg. It provides a rated output of 1000 W, a rated speed of 2,000 min-1, and an IP67 protection rating.
Internal Product Review
The P60B13100HXS00 is a Sanyo Denki P6 Super BL servo motor with brushless motor technology and a permanent magnet excitation system. Rated at 1000 W and 5.0 N·m torque, the motor delivers smooth, capable performance for demanding motion-control duty. IP67 protection is a strong finishing advantage for dependable industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P60B13100HXS00 is a servo motor manufactured by Sanyo Denki as part of the P6 Super BL Servo Motors series. It is intended for closed-loop motion axes that require precise speed and position control. Its brushless construction and permanent-magnet rotor allow the drive to deliver repeatable torque with minimal maintenance. The integrated incremental encoder provides real-time shaft feedback to the controller, supporting accurate motion under changing loads.
At its continuous operating point, the motor supplies 1,000 W of mechanical power while turning at a rated speed of 2,000 rpm. It produces 5.0 N·m of torque with a phase current of 7.8 Arms. The motor has a torque constant of 0.76 N·m/Arms, allowing torque to be calculated directly from current feedback. Winding resistance is 0.31 Ω, the electrical time constant is 10 ms, and the mechanical time constant is 0.90 ms, providing short response times during rapid motion changes. The motor has a power rate of 46 kW/s for acceleration and deceleration calculations. Position data are supplied by a wire-saving incremental detector with a resolution of 2,000 P/R, reducing the amount of encoder wiring required between the motor and controller. The permanent-magnet excitation system also reduces rotor inertia and improves operating efficiency.
The motor reaches a maximum speed of 3,000 rpm, providing additional speed for rapid indexing and short positioning cycles. Its square mounting flange measures 130 mm, allowing the housing to be attached securely to a compatible machine surface. The motor has a mass of 6.6 kg, which supports installation on compact gantries and robotic joints. It is supplied with no holding brake, so an external brake or another holding method must secure stationary loads when drive torque is unavailable. The standard brushless design operates with a voltage constant of 26.2 mV/rpm, which indicates the back electromotive force generated in relation to shaft speed. Its IP67 enclosure prevents dust ingress and withstands temporary water immersion, making the motor suitable for wet or exposed industrial locations.
