P50B08100HXS3FE Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08100HXS3FE is a brushless motor from the P6 Super BL Servo Motors series with a rated output of 1000 W and a maximum speed of 3000 min-1. It features flange type mounting, an overall length of 172 mm, and a shaft diameter of 16 mm. The motor is protected to IP55 standards and uses a permanent magnet excitation system with a 2000 pulses per revolution incremental encoder.
Internal Product Review
The P50B08100HXS3FE is a Sanyo Denki P6 Super BL servo motor with brushless motor technology and 1000 W rated output. Continuous time rating and 3000 min-1 maximum speed support stable, responsive motion in demanding axis applications. IP55 protection is a strong advantage for dependable servo service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100HXS3FE servo motor is manufactured by Sanyo Denki as part of the P6 Super BL Servo Motors series. It delivers precise rotation for industrial robots, packaging stations, and machine tools by translating drive commands into controllable torque and speed. The unit fits flange-mounted layouts where fast feedback and durable operation are required. Its brushless design supports responsive motion control while reducing wear associated with mechanical commutation.
The motor has a rated mechanical output of 1000 W, representing the continuous shaft power available without thermal derating. It can operate at speeds up to 3000 rpm, allowing direct coupling to moderate-speed loads during continuous service. A permanent-magnet excitation system eliminates the need for field wiring, and the brushless construction reduces commutation wear. Feedback is supplied by a reduced-wiring incremental encoder with a resolution of 2000 P/R, providing fine position data for closed-loop regulation. The enclosure carries an IP55 rating, which limits dust ingress and protects the motor against water jets from any direction. Electrical insulation withstands a proof test of 1500 VAC for one minute, supporting safe operation with compatible 200-volt and 400-volt drive systems. CE marking indicates conformity with applicable European safety directives.
An insulation resistance of at least 10 MΩ at 500 VDC confirms that the windings remain electrically isolated after installation. The steel shaft has a keyed end with a diameter of 16 mm, making it compatible with suitable couplings and pulleys. The flange arrangement accommodates a frame size of 80 or 86 mm, allowing the motor to attach directly to compatible gearboxes or mounting brackets. Its overall length is 172 mm, which limits the installation depth when the motor is recessed through a panel. A factory-installed shaft seal protects the front bearing against coolant splashes and other contaminants commonly present around industrial machinery. The motor does not include a holding brake, so vertical axes require external clamping or drive-applied torque to support a stationary load.
