Product Description:

The P50C08075HXS21 is an AC servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. The model forms part of the vendor’s high-performance motion platform and is intended for use with matched amplifiers in pick-and-place mechanisms, transfer lines, and general positioning systems. By combining compact frame dimensions with brushless technology, the unit supplies stable torque over a wide speed range and supports the tight feedback loops required by modern industrial automation.

The motor operates within a 200 VAC supply class, allowing direct connection to standard industrial inverters without a step-down transformer. This voltage minimizes conductor current and keeps cable size modest. Its continuous mechanical power rating is 750 W, which suits mid-range linear actuators and indexing tables that need moderate torque density. At full reference, the shaft can turn at 3000 rpm, so cycle times remain short even when high-resolution feedback is enabled. Positional information is generated by an incremental encoder that outputs 2,000 pulses per revolution; this pulse count gives the motion controller an angular granularity of 0.18°, improving repeatability in closed-loop modes. An enclosure rating of IP55 protects the motor against dust and low-pressure water jets, allowing use on machinery that is periodically washed.

Mechanical integration is simplified by the wiring-saving incremental encoder, which routes feedback signals through the power connector and reduces harness complexity. A square mounting flange measuring 80 or 86 mm aligns with many planetary gearboxes and bracket kits used in the 80-frame class. The shaft can couple directly to ball screws up to 20 mm in diameter, providing a direct drive path for thrust loads that match the motor’s output capability. Because the unit has no holding brake, vertical or suspended axes must employ an external brake or rely on the drive’s servo lock to prevent back-driving when power is removed.