P50C07040HXS23 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50C07040HXS23 is a servo motor from the P5 Super BL Servo Motors series with a rated output of 400 W and a peak torque of 3.92 N·m. It features a wiring-saved incremental encoder with a sensor resolution of 2,000 pulses per revolution and a maximum speed of 3000 min-1. The motor is IP55 rated for waterproofing, has a flange size of 76 mm, and uses permanent magnet excitation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50C07040HXS23 is a brushless servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. Intended for CNC positioning tables and packaging lines, it transforms drive current into controlled rotational movement while maintaining feedback through its incremental encoder. The motor supplies continuous power to ball-screw or belt transmissions in installations that demand repeatable speed and torque regulation.
At its continuous operating point, the motor delivers 400 W of mechanical power, enough to drive moderate-inertia loads without external gearing. This output corresponds to a rated shaft torque of 1.276 N·m under nominal operating conditions. For rapid indexing moves, the drive can command the rotor up to 3000 rpm while permitting a momentary torque surge of 3.92 N·m; this overload margin accommodates acceleration spikes before the thermal model limits further demand. Position feedback is derived from a wire-saving incremental encoder that produces 2,000 pulses per revolution, allowing a controller to divide each mechanical revolution into fine digital counts for tight servo loops. The motor is intended for continuous duty and includes a fully enclosed, self-cooling housing that dissipates heat without auxiliary fans.
The square flange measures 76 mm, providing a compact mechanical interface for attaching a compatible gearhead or ball screw. Stator excitation is supplied by a permanent-magnet field, so no external magnetizing power is required and the motor maintains a responsive torque output. The internal insulation withstands 1,500 VAC for one minute, supporting operation with regulated servo inverters. A molded gasket and sealing rings establish an IP55 enclosure that protects against dust and water jets. The motor does not include a holding brake, which reduces its overall length and rotational inertia. An external brake or mechanical locking device is necessary when an axis must remain stationary after motor power is removed.
