P50B08100VCL7F Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08100VCL7F is a 1000 W brushless servo motor from the P5 Super BL Servo Motors series, featuring a rated speed of 3000 rpm. The motor has a continuous stall torque of 3.92 Newton-meters, is equipped with a holding brake powered by 24V, and offers IP55 protection. It uses a permanent magnet excitation system and has a flange size of 80 or 86 millimeters.
Internal Product Review
The P50B08100VCL7F is a Sanyo Denki P5 Super BL brushless servo motor with 1000 W rated output and IP55 protection. Rated performance is well balanced for motion applications, with 3.185 N·m rated torque and 3000 min⁻¹ rated speed. Peak capability stands out with 11.76 N·m peak torque and an equipped 24V holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100VCL7F is a brushless rotary servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. Designed for positioning and velocity control in industrial automation, the motor converts electrical energy into regulated mechanical shaft power, allowing machine axes to follow command profiles accurately. Its rated output is 1,000 W, providing a practical power level for medium-sized actuators used on packaging lines, pick-and-place robots, and semiconductor manufacturing equipment. The brushless design eliminates commutator wear and reduces the maintenance associated with mechanical brushes.
The motor operates at a nominal speed of 3,000 rpm and delivers a rated torque of 3.185 N·m while drawing 6.7 A rms from the drive. Its torque constant is 0.553 N·m/A rms, providing a predictable relationship between supplied current and developed torque. When the machine is stationary but energized, the winding can sustain a continuous stall torque of 3.92 N·m without thermal overload. Momentary load surges can reach a peak torque of 11.76 N·m. The permanent-magnet excitation system supports efficient torque production, while an 80 mm or 86 mm metric flange accommodates compatible planetary gearboxes and direct-drive couplings. A mechanical time constant of 1.1 ms allows rapid speed changes, and the motor has a power rate of 38.3 kW/s.
Control responsiveness is supported by an electrical time constant of 5.9 ms, which assists with current-loop bandwidth settings in the servo amplifier. A built-in holding brake engages when the 24 V brake supply is removed, helping prevent vertical loads from drifting while the motor is unpowered. The enclosure has an IP55 protection rating, shielding internal components against dust ingress and water jets in general factory environments. A phase resistance of 0.41 Ω affects winding losses and should be considered when matching the motor with a compatible drive. Internal permanent magnets provide a favorable torque-to-inertia ratio for applications that require frequent acceleration, deceleration, and accurate positioning. The motor’s electrical and mechanical response characteristics support controlled movement in repetitive industrial motion cycles.
