P50B08100HXS3B Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B08100HXS3B is part of the P5 Super BL Servo Motors series and features self-cooling and a fully closed enclosure. It uses a permanent magnet excitation system and a wiring-saved incremental encoder with a sensor resolution of 2,000 pulses per revolution. This brushless motor has a rated output of 1000 watts, a maximum speed of 3000 revolutions per minute, and a protection rating of IP55.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100HXS3B is a servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. As a brushless unit with a permanent-magnet excitation system, it converts electrical input into controlled rotary motion for positioning axes and speed-regulated conveyors in automated machinery. Its incremental encoder uses a reduced-wiring design to provide position feedback to the drive controller, allowing closed-loop control with fewer encoder connections. The motor is designed for compact installations that require dependable torque delivery and minimal maintenance.
This model supplies a continuous mechanical power output of 1000 W, enabling it to operate mid-range actuators without external gear reduction. Its peak operating speed reaches 3000 rpm, so the drive can command rapid indexing moves when short cycle times are required. Feedback accuracy is supported by a sensor resolution of 2,000 P/R, providing fine incremental counts for smooth speed regulation and precise position control. The IP55 protection rating guards the stator against limited dust ingress and low-pressure water jets. A shaft diameter of 16 mm provides a standard interface for couplings, pulleys, or planetary gearheads while balancing torsional rigidity with low inertial load.
Mechanical integration is supported by a fully enclosed housing that resists airborne contaminants while relying on self-cooling. No external fan or liquid cooling circuit is required, which reduces the number of auxiliary components needed around the motor. The overall length measures 172 mm, allowing the unit to fit within short machine envelopes. Its square mounting face follows an 80 or 86 mm flange pattern for direct installation on compatible machine frames, and the flange-type mounting arrangement helps maintain accurate shaft alignment. The motor is supplied without a holding brake, so an external mechanism or drive-applied torque must retain stationary loads when necessary. An oil seal provides additional protection around the shaft against lubricant leakage and contaminant entry. The continuous-duty rating permits the motor to sustain torque indefinitely when it operates within its applicable thermal limits.
