P50B08100HXS23 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B08100HXS23 is part of the P5 Super BL Servo Motors series and features a rated output of 1000 W with a maximum speed of 3000 min-1. This brushless motor uses a flange type installation and is protected to IP55 class with a fully closed, self-cooling system. It has a wiring-saved incremental encoder with a resolution of 2000 pulses per revolution and operates at 200 VAC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100HXS23 servo motor is produced by Sanyo Denki and belongs to the P5 Super BL Servo Motors series. This brushless unit is intended for precise positioning and speed regulation in automated machinery such as pick-and-place axes and indexing tables. By integrating a feedback encoder with a sealed housing, the motor delivers repeatable torque while withstanding conditions commonly found in industrial automation cells. Its compact design allows it to serve motion axes where accurate control and dependable operation are required.
Rated mechanical output reaches 1000 W, and the windings are designed for a 200 VAC supply, allowing the motor to operate with standard servo drives in 200-volt control panels. A peak shaft speed of 3000 rpm extends the usable speed range for conveyors and rotary actuators without requiring gear reduction. The excitation system uses a permanent-magnet rotor, reducing rotor inertia and improving step response compared with wound-field designs. A low-wire-count incremental encoder provides 2000 P/R of position data, allowing tight control-loop gains while limiting cabling requirements. The motor uses a flange-mounting interface with selectable 80 or 86 mm pilot dimensions for compatibility with different machine frames. Its continuous-duty rating supports nonstop operating cycles when the motor remains within its permitted load and temperature limits.
Electrical insulation withstands 1500 VAC for one minute between the windings and frame. Insulation resistance remains at least 10 MΩ when tested at 500 VDC, helping protect the connected drive electronics from leakage current. An IP55 enclosure, a shaft seal, and a fully enclosed self-cooling design help keep dust and water away from the stator. Because the motor uses a brushless design, it does not require routine commutator maintenance. The motor does not include a holding brake, so an external restraint is required when a vertical axis must remain stationary after power is removed. Heat generated during operation is dissipated through the housing without an external cooling fan.
