P50B08100HXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B08100HXS00 is a brushless standard motor from the P5 Super BL Servo Motors series. It offers a rated output of 1000 W and a maximum speed of 3000 min-1. This model uses a wiring-saved incremental encoder and has a flange size of 80 or 86 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100HXS00 is a servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. It serves as an electromechanical actuator that converts commanded drive current into controlled rotary motion. The motor is suitable for positioning tables, pick-and-place heads, and other automated machine axes. Typical applications include packaging equipment, semiconductor machinery, and material-handling systems that require repeatable positioning and regulated speed.
This model supplies a continuous mechanical output of 1000 W, indicating the power available to drive a connected load at the rated operating point. Its shaft can reach a maximum speed of 3000 rpm, supporting applications that use rapid indexing and frequent changes in position. A square flange measuring 80 or 86 mm across the mounting face supports attachment to compatible gearboxes or machine frames. Rotor position is reported through a wiring-saved incremental encoder, which reduces the number of conductors needed for feedback transmission. This feedback allows a compatible servo drive to monitor shaft movement and correct deviations from the commanded position or speed. Internal commutation uses permanent-magnet excitation with brushless construction, eliminating mechanical brushes and supporting smooth operation across the motor’s speed range.
The unit is supplied without a holding brake, so drive torque or an external mechanism must secure the load when holding force is required. This configuration should be considered for vertical or gravity-loaded axes because the shaft is not mechanically restrained after motor power is removed. The unit follows a standard motor design without special seals, an extended shaft, or a high-inertia rotor. Its conventional configuration supports installation with compatible servo drives, feedback cables, and power connections selected for this motor series. Proper drive settings allow the encoder signals and motor characteristics to be used for closed-loop control during acceleration, steady-speed operation, deceleration, and precise positioning cycles.
