P50B08100FXSS1 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B08100FXSS1 is a servo motor in the P5 Super BL Servo Motors series with a frame size of 86 mm. It has a rated output of 1,000 W, rated torque of 3.185 N·m, and a rated speed of 3,000 min-1. The motor features an IP55 protection rating and weighs 5.05 kg, with an encoder resolution of 2,000 pulses per revolution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100FXSS1 is a brushless AC servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. It delivers commanded torque and velocity to linear stages, pick-and-place arms, and other precision axes within industrial automation cells. The 86 mm square flange mates with common IEC adapters, allowing the unit to fit into compact machine frames while the motor and feedback package supplies the closed-loop performance required for repeatable positioning and speed regulation.
At its nominal operating point, the motor supplies 1,000 W of mechanical output while turning at 3,000 rpm. This speed and torque combination corresponds to a rated shaft torque of 3.185 N·m delivered with a phase current of 6.7 A rms. The electromagnetic design produces that torque-per-ampere ratio through a motor constant of 0.553 N·m/A rms. With a rotor inertia of 2.651 × 10⁻⁴ kg·m², the rotor accelerates rapidly without sacrificing stability. A phase winding resistance of 0.41 Ω influences drive voltage selection and the dynamic current rise. Feedback is provided by a 2,000-pulse-per-revolution incremental encoder, allowing fine position interpolation for the motion controller. Because the rated current is lower than the continuous stall value, the motor can absorb brief thermal excursions without exceeding its insulation limits.
For static or low-speed loads, the motor can hold 3.92 N·m continuously while drawing 7.5 A rms, subject to thermal equilibrium inside its IP55 enclosure. Short overloads are accommodated by a maximum stall torque of 11.76 N·m at up to 25.7 A rms, enabling rapid indexing or emergency stops without demagnetization. The 5.05 kg mass adds thermal capacity and mechanical rigidity, supporting repeatable response during high-frequency duty cycles. The IP55 enclosure protects internal components against harmful dust ingress and low-pressure water jets, allowing installation in mildly wet processing areas.
