P50B08100DXV00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08100DXV00 is part of the P5 Super BL Servo Motors series, featuring a brushless design and a built-in super capacitor. It offers a rated output of 1000 watts, a continuous stall torque of 3.92 Newton-meters, and a peak torque of 11.76 Newton-meters. This standard motor has an IP55 protection rating, a flange size of 80 or 86 millimeters, and reaches a maximum speed of 4500 revolutions per minute.
Internal Product Review
The P50B08100DXV00 is a Sanyo Denki brushless servo motor with 1000 W rated output that stands out for precise motion control. An ABS-R II absolute sensor and IP55 protection support accurate feedback and dependable operation in demanding equipment. Peak torque of 11.76 N·m and maximum speed of 4500 min-1 make the motor an excellent choice for responsive servo duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100DXV00 is a brushless AC servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. As a standard motor design with a built-in supercapacitor, it bridges short power interruptions while its ABS-R II absolute sensor preserves position data. The available 80 or 86 mm mounting flange and 16 mm shaft allow the unit to fit medium-frame equipment that requires closed-loop speed and torque control for automated tool changers, pick-and-place axes, and general transfer stations.
During continuous operation, the motor outputs 1000 W at a rated speed of 3000 rpm, producing a rated torque of 3.185 N·m while drawing 6.7 Arms. For rapid acceleration, the controller can demand a peak torque of 11.76 N·m with up to 25.7 Arms; the thermal model accommodates this demand by referencing the 38.3 kW/s power rate. The enclosure has an IP55 protection rating, limiting exposure to dust and water jets. A phase resistance of 0.41 Ω and an electrical time constant of 5.9 ms determine current rise behavior, whereas the 1.1 ms mechanical time constant governs the rotor’s speed response to torque commands.
The magnetic circuit sustains 3.92 N·m at stall without overheating, and a torque constant of 0.553 N·m/Arms allows the amplifier to calculate current from the demanded load. Overspeed operation is possible up to 4500 rpm when machine sequencing requires additional velocity, with position feedback maintained by the absolute sensor. The motor is supplied without a holding brake, so static load retention must be handled externally. Its brushless construction eliminates brush wear, and the built-in supercapacitor supports a controlled retreat to a safe position during a loss of line power. Installation is supported by the common flange patterns, while the 16 mm shaft accepts standard keyed couplings.
