P50B08100DXS07 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08100DXS07 is a brushless servo motor from the P5 Super BL Servo Motors series. It has a rated output of 1000 W, a rated speed of 3000 min-1, and a flange size of 80 or 86 mm. The motor features a wiring-saved incremental encoder with a resolution of 2000 P/R and weighs 5.05 kg.
Internal Product Review
The P50B08100DXS07 is a Sanyo Denki P5 Super BL servo motor featuring brushless motor technology and a rated output of 1000 W. Rated torque of 3.185 N·m and max speed of 4500 min⁻1 give the motor a very balanced performance profile for dynamic motion axes. The wiring-saved incremental encoder with 2000 P/R resolution is a strong design choice for clean feedback integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100DXS07 is a brushless AC servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. It converts drive current into precise shaft motion for industrial automation axes that require repeatable velocity and position control. A simplified-wiring incremental encoder serves as the detector, reducing the number of feedback connections to the drive while maintaining full resolution. Combined with the motor’s low-inertia construction, this feedback supports responsive operation in high-cycle packaging, pick-and-place, and electronic assembly equipment.
The motor mounts on machines that accept a flange diameter of 80 or 86 mm. Under continuous load, it produces 1000 W at a nominal speed of 3000 rpm, with a continuous shaft torque of 3.185 N·m. This operating point requires a phase current of 6.7 Arms through a winding with a resistance of 0.41 Ω. Position data are delivered at 2000 P/R, providing detailed feedback for accurate speed and position regulation. The rotor has a mechanical time constant of 1.1 ms, allowing velocity to settle quickly after command changes. At stall, the motor produces 3.92 N·m of torque while drawing 7.5 Arms of current.
During transient operation, the shaft can produce a peak torque of 11.76 N·m while the windings carry a peak current of 25.7 Arms for rapid acceleration. The motor has an electrical time constant of 5.9 ms and a torque constant of 0.553 N·m/Arms. Because the unit does not include a holding brake, an external clamping mechanism is required when the shaft must remain stationary without power. The rotor can accelerate to a maximum speed of 4,500 rpm. A power rate of 38.3 kW/s supports fast changes in motion, while the motor’s mass of 5.05 kg helps keep inertia modest. These characteristics permit the motor to respond quickly to short acceleration commands while remaining suitable for repetitive automated motion.
