P50B08100DCVT2 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08100DCVT2 is part of the P5 Super BL Servo Motors series and uses brushless motor technology. This motor is equipped with a holding brake, an absolute sensor, and a super-capacitor. It has a rated output of 1000 watts, a rated speed of 3000 min-1, and a rated torque of 3.185 Newton-meters.
Internal Product Review
The P50B08100DCVT2 is a P5 Super BL servo motor with 1000 W rated output and brushless motor technology. ABS-R II absolute sensor feedback and a built-in super-capacitor make the design especially effective for controlled restart behavior and dependable position management. Rated torque of 3.185 N·m with max stall torque of 11.76 N·m gives the motor strong servo authority for dynamic motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08100DCVT2 is a brushless AC servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. Designed for high-precision positioning and speed regulation in automated machinery, the unit combines an 80- or 86-millimeter flange frame with an integrated absolute sensor (ABS-R II) for immediate position referencing at power-up. A built-in supercapacitor maintains encoder data during a power loss, allowing the control system to retain position information without repeating the homing process. This capability supports automated equipment that must resume controlled motion accurately after an interruption.
At its continuous operating point, the motor delivers 1000 W of shaft power while running at a rated speed of 3000 rpm and producing 3.185 N·m of rated torque. This output requires a phase current of 6.7 Arms, and the motor has a torque constant of 0.553 N·m/Arms. A low phase resistance of 0.41 Ω helps limit copper losses during continuous operation. The electrical time constant of 5.9 ms gives the drive a quick current response when torque commands change. The mechanical time constant of 1.1 ms allows the rotor to accelerate rapidly and follow changing motion profiles with minimal delay.
For higher load transients, the motor can sustain a continuous stall current of 7.5 Arms and a continuous stall torque of 3.92 N·m. Its magnetic design supports up to 11.76 N·m of peak stall torque when the drive momentarily supplies the maximum current of 25.7 Arms. The integrated holding brake operates at 24 V and draws 0.33 A, securing the load when motor power is removed without placing a substantial demand on the control-panel power supply. This braking function is suitable for vertical axes and intermittent-duty industrial robots that must hold their position while stopped. The motor can reach a maximum speed of 4500 rpm for fast indexing moves, while its brushless construction reduces wear associated with mechanical commutation components.
