P50B08075HXS6L Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08075HXS6L is a brushless motor from the P5 Super BL Servo Motors series with a rated output of 750 W and a maximum speed of 3000 min-1. This self-cooled motor includes an incremental encoder with a resolution of 2000 P/R and has a flange size of 80 or 86 mm. It features IP55 protection, F class insulation, and operates at 200 VAC, with an overall length of 149 mm and a 16 mm shaft diameter.
Internal Product Review
The P50B08075HXS6L is a Sanyo Denki P5 Super BL servo motor with 750 W rated output and a 200 VAC voltage class. Self-cooling construction and IP55 protection make the motor well suited for enclosed industrial service with solid thermal and environmental performance. A wiring-saved incremental encoder with 2000 P/R resolution supports dependable feedback, making the motor a strong motion-control choice.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08075HXS6L servo motor is produced by Sanyo Denki for the P5 Super BL Servo Motors series. It is a brushless, permanent-magnet unit that supports closed-loop speed and position control in automated machinery. The integrated wiring-saving incremental encoder provides precise feedback to the drive while reducing the number of required connections. Its compact design supports installation in machinery where available mounting space is limited.
The motor delivers a continuous mechanical output of 750 W, providing midrange power for indexing tables, feeders, and conveyors. The motor operates with a 200 VAC drive system commonly used in industrial control cabinets. A maximum speed of 3000 rpm permits rapid operating cycles when commanded by the drive. The enclosure has an IP55 rating, protecting the internal components against dust and low-pressure water jets in typical factory environments. The coil insulation withstands a high-potential test of 1500 VAC for 1 minute, providing electrical separation between the windings and laminated core. The permanent-magnet excitation system supports brushless operation, which reduces wear associated with mechanical commutation. Natural convection removes operating heat without requiring an auxiliary blower. The motor does not include a holding brake, so an external clamp is required when the shaft must remain locked without drive power.
A machined shaft with a diameter of 16 mm transfers torque to a compatible coupling or gearhead. The incremental encoder provides 2000 P/R resolution, supplying detailed position data for smooth velocity control and accurate motion feedback. Class F insulation supports winding temperatures up to 155 °C during demanding operating cycles. The motor meets vibration grade V15, providing suitable balance for common horizontal and vertical mounting arrangements. Its flange pattern accommodates 80 or 86 mm sizing for integration with compatible machine interfaces. A radial shaft seal helps prevent coolant from reaching the internal components. The motor has an overall length of 149 mm, allowing it to fit within compact mechanical assemblies without requiring excessive axial clearance.
