P50B08075HXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08075HXS00 is a brushless motor with a rated output of 750 W and a maximum speed of 3000 min-1. Part of the P5 Super BL Servo Motors series, it features a flange size of 80 or 86 mm and an overall length of 149 mm. This motor uses a fully closed, self-cooling design with an IP55 protection rating and a wiring-saved incremental encoder.
Internal Product Review
The P50B08075HXS00 is a P5 Super BL servo motor with brushless motor technology and a 750 W rated output. Fully closed self-cooling construction and IP55 protection make the motor well suited for demanding industrial installations. A wiring-saved incremental encoder supports clean integration, and 3000 min-1 max speed gives the unit strong motion performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08075HXS00 is a brushless servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. This standard motor uses permanent-magnet excitation and is intended for closed-loop motion axes that require dependable torque regulation in industrial automation cells. Its flange-type mounting interface supports secure attachment to compatible machine surfaces. An overall length of 149 mm allows the unit to fit within compact machinery frames while leaving sufficient room for the required power and feedback connections.
Thermal management is provided by a fully enclosed, self-cooling construction, so no external blower or liquid cooling circuit is required to manage winding heat under normal operating conditions. Rotor position is monitored by a wiring-saving incremental encoder, which reduces cabling while providing high-resolution feedback to the controller. The servo reaches a maximum speed of 3000 rpm, supporting moderate-to-high throughput on pick-and-place tables, indexing conveyors, and other repetitive motion axes. Its rated mechanical output of 750 W supports continuous operation when the connected drive is configured for the intended duty cycle. The housing has an IP55 protection rating, providing resistance to dust and low-pressure water jets in factory environments subject to moisture or washdown procedures.
Mechanical power is transmitted through a 16 mm-diameter shaft with a seal that helps prevent lubricant loss and contaminant entry. The motor has a dielectric strength of 1,500 VAC for 1 minute, providing an electrical safety margin between energized components and the housing. Insulation resistance is rated at a minimum of 10 MΩ at 500 VDC, helping maintain electrical isolation during operation. Dynamic balance meets the V15 vibration grade, limiting transmitted oscillations that could affect nearby couplings, sensors, or other precision components. The motor is supplied without a holding brake, so stationary loads must be retained by drive-applied torque or an external locking mechanism when necessary. Its square flange measures 80 or 86 mm, depending on the applicable mounting arrangement, and provides a broad contact surface for stable installation.
