P50B08075HCL7M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08075HCL7M is part of the P5 Super BL Servo Motors series and features a rated output of 750 W with a maximum speed of 3000 min-1. This brushless motor operates at 200 VAC and is equipped with a holding brake that uses a 24V supply. The motor has an IP55 protection class, flange type installation, and an insulation grade of F.
Internal Product Review
The P50B08075HCL7M is a Sanyo Denki brushless servo motor rated at 750 W and 200 VAC. Fully closed self-cooling construction with IP55 protection gives this P5 motor a clean, well-engineered profile for industrial motion duty. Continuous-duty capability and a maximum speed of 3000 min-1 make this unit especially appealing for steady, responsive servo performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08075HCL7M is a brushless AC servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. It serves as a rotary actuator in industrial automation, converting electrical energy into regulated shaft torque and position for feeders, pick-and-place heads, and indexing tables. The permanent-magnet rotor supports responsive acceleration and accurate motion when paired with a compatible servo drive. Its fully enclosed, self-cooling housing protects the windings without requiring an external airflow device, which simplifies installation in compact machinery. The motor is suitable for controlled motion in packaging equipment, electronics assembly systems, and material-handling applications.
Rated mechanical output reaches 750 W, supplying continuous power to connected machinery without thermal derating under normal operating conditions. The stator is wound for a nominal supply of 200 VAC, matching servo amplifiers in that voltage category. A maximum shaft velocity of 3000 rpm establishes the upper speed limit for positioning and process-control tasks. The mounting face uses an IEC pattern with an 80 or 86 mm flange, allowing installation on compatible frame-size 80 machine interfaces. The enclosure meets IP55 requirements, helping prevent harmful dust accumulation and protecting internal components against low-pressure water jets during routine washdowns. These operating characteristics support continuous-duty axes that require stable speed, repeatable positioning, and a compact mounting footprint.
Electrical insulation is graded as Class F, and the winding-to-frame insulation resistance remains at least 10 MΩ when measured at 500 VDC. The windings withstand a dielectric test voltage of 1,500 VAC for one minute, providing insulation integrity between energized conductors and the motor frame. The integrated electromagnetic holding brake operates with a 24 V supply and secures vertical or offset loads when the axis is stopped. Compliance with the V15 vibration grade accommodates moderate dynamic forces produced during acceleration, deceleration, and repetitive indexing. The flange-mounted housing supports rigid alignment with the driven mechanism, while the integral shaft seal helps restrict contaminant entry around the output shaft. Its continuous-duty rating permits sustained operation when load, speed, drive settings, and ambient conditions remain within the motor’s approved operating limits.
