P50B08075DXV000T Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08075DXV000T is part of the P5 Super BL Servo Motors series and features a brushless motor design with a rated output of 750 W. It has a continuous stall torque of 2.94 Nm and a maximum speed of 4500 rpm. This standard motor is equipped with an absolute sensor and a built-in super-capacitor, and includes a backlashless planet gear with a 1/11 gear ratio.
Internal Product Review
The P50B08075DXV000T is a Sanyo Denki P5 Super BL brushless servo motor with 750 W rated output and 3000 min^-1 rated speed. A backlash less planet gear with 1/11 ratio supports precise motion control and clean torque transmission in indexed applications. The ABS-R II absolute sensor and 8.82 N·m instantaneous stall torque make the unit a strong choice for responsive, high-confidence servo performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08075DXV000T servo motor is produced by Sanyo Denki for the P5 Super BL Servo Motors series. As a brushless AC unit, it converts drive current into rotational motion that positions axes or spindles in automated machinery. The integrated absolute sensor supports closed-loop control, while the built-in supercapacitor supplies backup power for encoder memory. In factory cells, this motor provides repeatable torque without mechanical backlash when paired with its planetary gear, making it suitable for indexing tables, pick-and-place heads, and other motion modules that require precise speed regulation.
The motor is rated for 2.94 N·m of continuous stall torque, allowing it to hold a load at zero speed without overheating. Under standard operation, it delivers a continuous running torque of 2.381 N·m, which aligns with its thermal limits at a rated current of 6.0 Arms. For short-duration loads, the shaft withstands an instantaneous peak torque of 8.82 N·m, supporting cam profiles and rapid acceleration without exceeding magnetic saturation. A continuous mechanical output of 750 W is available at the rated shaft speed of 3000 rpm, providing suitable power density for compact gantry axes.
The motor can reach a maximum rotational speed of 4500 rpm, providing an overspeed margin for rapid positioning sequences. Electrical responsiveness is supported by an electrical time constant of 5.8 ms, so current in the windings stabilizes quickly after a command step. The magnetic system produces torque in proportion to current at 0.447 N·m/Arms, and the low stator phase resistance of 0.43 Ω keeps copper losses modest during continuous operation. A mechanical time constant of 1.2 ms supports rapid speed changes and responsive motion under changing loads. These electrical and mechanical response characteristics allow the controller to correct position and velocity errors quickly in pick-and-place or inspection equipment.
