P50B08075DXS44 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08075DXS44 is part of the P5 Super BL Servo Motors series and uses brushless motor technology. It features a rated output of 750 W, rated speed of 3,000 min-1, and offers a rated torque of 2.381 N·m. This motor is IP55 rated and comes with a wiring-saved incremental encoder.
Internal Product Review
The P50B08075DXS44 is a Sanyo Denki brushless servo motor that stands out with 750 W rated output and 3,000 min^-1 rated speed. IP55 protection and a wiring-saved incremental encoder make the design especially appealing for controlled motion setups that need stable feedback and dependable environmental resistance. A strong technical option for servo axes, highlighted by 8.82 N·m max stall torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08075DXS44 is a brushless servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. It uses a wiring-saving incremental encoder to report rotor position and is suitable for applications that require compact feedback cabling. An 80 or 86 mm square flange allows direct mounting to common gearboxes and machinery frames, making the unit easier to integrate into automated axes. As a rotary actuator in industrial automation, the motor converts electrical energy into controlled torque and speed for conveyor sections, pick-and-place heads, and indexing tables.
The motor delivers a rated output of 750 W at a rated speed of 3,000 rpm, producing 2.381 N·m of torque during normal operation. At stall, the winding sustains a continuous torque of 2.94 N·m without overheating. The motor reaches a maximum speed of 4,500 rpm, providing additional speed capacity for short motion cycles. Its electromagnetic design provides a torque constant of 0.447 N·m/A RMS. The rated armature current is 6.0 A RMS, and the phase resistance is 0.43 Ω, which determines the associated copper loss. An electrical time constant of 5.8 ms and a mechanical time constant of 1.2 ms support rapid current regulation and velocity settling.
The motor has a continuous stall current of 7.1 A RMS and an instantaneous peak current of 23.7 A RMS for brief acceleration periods. The peak current supports a shaft torque of up to 8.82 N·m. Energy can be exchanged rapidly, as indicated by a power rate of 29.5 kW/s, allowing the motor to follow high-frequency position profiles without magnetic saturation. The enclosure has an IP55 rating, protecting internal components against dust and water jets commonly encountered on factory floors. The motor does not have a holding brake, so static loads must be retained by drive-applied torque or an external mechanical device. Encoder feedback supplies the position information required by the servo drive for closed-loop control throughout repeated motion cycles.
