P50B08075DXS12 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08075DXS12 is a brushless servo motor from the P5 Super BL Servo Motors series with a rated output of 750 W and a rated speed of 3000 min-1. It has a continuous stall torque of 2.94 Nm, a flange size of 80 or 86 mm, and a mass of 3.9 kg. This motor uses a wiring-saved incremental encoder with a resolution of 2000 pulses per revolution and operates at 200 VAC voltage class.
Internal Product Review
The P50B08075DXS12 is a Sanyo Denki P5 Super BL servo motor with 750 W rated output and a 200 VAC voltage class. Brushless motor technology paired with a wiring-saved incremental encoder supports smooth control response and streamlined integration. Rated for 3000 min-1 speed and 2.381 N·m torque, the unit stands out as an efficient choice for precise motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08075DXS12 is a brushless servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. It combines a permanent-magnet rotor with stator-mounted windings to deliver closed-loop torque. The motor supports positioning tables, pick-and-place arms, and similar automation axes that require repeatable control of velocity and angular position.
During continuous operation, the motor can supply 750 W of mechanical power while turning at its rated speed of 3000 rpm. At that operating point, it produces a shaft torque of 2.381 N·m and draws a phase current of 6.0 A RMS from a 200 VAC drive. The reduced-wiring incremental encoder mounted on the rear flange outputs 2,000 pulses per revolution, allowing one cable to carry encoder power and feedback signals. An electrical time constant of 5.8 ms and a mechanical time constant of 1.2 ms indicate fast current rise and rotor acceleration, which can reduce following error in high-gain servo loops. The phase resistance is 0.43 Ω, and the brushless design eliminates commutator wear. Standard square flanges measuring 80 or 86 mm simplify attachment to gearheads or machine plates. The motor does not include a holding brake, so the drive or an external locking device must retain static loads.
The rotor can reach a maximum speed of 4500 rpm for short operating intervals when additional speed is required. Maximum stall torque is 8.82 N·m, while continuous stall torque is 2.94 N·m; these values help with drive-amplifier selection and mechanical overload protection. The motor has a torque constant of 0.447 N·m/A RMS, which relates commanded current to delivered torque across the operating range. Its 3.9 kg mass adds thermal inertia and helps damp vibration after the motor is securely mounted to a rigid machine frame.
