P50B08075DXS00M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08075DXS00M is a brushless servo motor from the P5 Super BL Servo Motors series. It has a rated output of 750 W, a rated speed of 3000 min-1, and delivers a rated torque of 2.381 N·m. The motor features a wiring-saved incremental encoder with a 2000 P/R sensor resolution and weighs 3.9 kg.
Internal Product Review
The P50B08075DXS00M is a Sanyo Denki P5 Super BL servo motor with 750 W rated output and 3000 min-1 rated speed. A wiring-saved incremental encoder with 2000 P/R resolution supports clean feedback and stable positioning performance. Peak stall torque of 8.82 N·m and maximum speed of 4500 min-1 make the motor a strong choice for responsive servo axes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08075DXS00M is a brushless AC servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. This standard-frame actuator supplies closed-loop torque and speed to automated axes, allowing machinery to execute rapid positioning, indexing, and velocity regulation without the maintenance demands of brushed designs. It is intended for direct coupling to ball screws, timing pulleys, or compact gearboxes where responsive motion and consistent output are required in packaging, electronics, and material-handling equipment.
The motor complies with CE and UL requirements, allowing installation in North American and European industrial systems. Under continuous stall conditions, the winding draws 7.1 A rms and delivers 2.94 N·m of stall torque, indicating the thermal load applied at zero speed. A wiring-saving incremental encoder with 2,000 pulses per revolution provides feedback while reducing the number of required connections. The electrical time constant of 5.8 ms indicates how quickly current rises through the three-phase windings, and the phase resistance of 0.43 Ω affects I²R losses during sustained operation. Mounting uses an 80 or 86 mm square flange, and the motor has no holding brake. Rotor inertia is 1.926 × 10⁻⁴ kg·m², which supports responsive acceleration when the connected load is properly matched. A torque constant of 0.447 N·m/A rms provides the relationship between motor current and generated torque for drive configuration.
The motor has a continuous output rating of 750 W at a rated speed of 3000 rpm, providing 2.381 N·m of rated torque for conveyors or actuators operating over extended duty cycles. When rapid acceleration is required, the motor can withstand a peak stall torque of 8.82 N·m while the inverter supplies up to 23.7 A rms. Its mechanical time constant is 1.2 ms, complementing the electrical time constant to support short settling times. A mass of 3.9 kg keeps the load on the supporting machine structure moderate. The maximum permissible speed is 4500 rpm for brief operating periods that require higher throughput.
