P50B08075DCS00M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B08075DCS00M is part of the P5 Super BL Servo Motors series and is a brushless servo motor with a rated output of 750 W and a rated torque of 2.381 N·m. It features an IP55 protection rating, operates at a maximum speed of 4500 min-1, and is equipped with a wiring-saved incremental encoder with 2000 P/R resolution. This standard motor includes a holding brake with 2.94 N·m braking torque and has an overall length of 189 mm.
Internal Product Review
The P50B08075DCS00M is a Sanyo Denki P5 Super BL servo motor delivering 750 W rated output through brushless motor technology. High-confidence axis performance comes from 8.82 N·m instantaneous stall torque and a wiring-saved incremental encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B08075DCS00M is a brushless AC servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. It is intended for positioning and speed-regulated axes in industrial automation. The motor converts commands from a compatible drive controller into controlled shaft motion for conveyors, pick-and-place heads, indexing tables, and similar machinery. Its 80 mm flange provides a compact mounting interface for installations where available space is limited.
The motor delivers a continuous mechanical output of 750 W, indicating how much power it can supply to a load during steady operation without overheating. It produces a rated torque of 2.381 N·m at a nominal shaft speed of 3000 rpm. The phase current is 6.0 Arms, so the selected drive must provide sufficient current capacity for each motor phase. A torque constant of 0.447 N·m/Arms relates armature current to the torque produced at the shaft. These electrical and mechanical values support accurate drive selection and help maintain stable performance under continuous loading.
The rotor can reach a maximum speed of 4500 rpm during motion that extends beyond the nominal operating range. An instantaneous stall torque of 8.82 N·m supports brief load peaks during acceleration, deceleration, or rapid positioning. The built-in brake provides 2.94 N·m of holding torque at 24 V, helping secure vertical or unpowered axes without an external clamp. The enclosure has an IP55 protection rating, which guards the internal components against dust and water jets encountered in typical industrial settings. Position feedback is supplied by a wire-saving incremental encoder with a resolution of 2000 pulses per revolution, allowing the drive to regulate position and speed while reducing feedback wiring. The motor has an overall length of 189 mm and can connect to compatible planetary gearboxes, timing-belt pulleys, or direct-drive couplings.
