P50B07050DCL20 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B07050DCL20 is a servo motor from the P5 Super BL Servo Motors series with a rated output of 500 W and a maximum speed of 4500 min-1. It features a 76 mm flange size, self-cooling system, and an integrated holding brake with a brake voltage of 24V. This brushless motor uses a permanent magnet excitation system and holds an IP55 protection rating.
Internal Product Review
The P50B07050DCL20 is a Sanyo Denki P5 Super BL servo motor with 500 W rated output and a 200 VAC voltage class. Self-cooling and IP55 protection support dependable operation in demanding machine environments. An equipped 24 V holding brake adds useful axis retention, making this motor a very capable choice for precise continuous-duty service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07050DCL20 belongs to the P5 Super BL Servo Motors series produced by Sanyo Denki. This brushless model integrates into positioning tables, pick-and-place heads, and similar motion axes where compact torque sources are required. The permanent-magnet excitation system eliminates rotor windings, reducing inertia and allowing fast response, while the included holding brake secures loads whenever power is removed. With flange mounting and a built-in shaft seal, the motor installs directly on machine frames and supports demanding automated processes.
Rated mechanical output reaches 500 W, representing the continuous shaft power available during continuous-duty operation. When supplied with 200 VAC, the rotor can attain a top speed of 4500 rpm, giving the drive a broad speed and torque range. The square flange measures 76 mm across, and this compact footprint accommodates compatible gearhead interfaces. The motor has an IP55 protection rating, which limits dust ingress and protects against low-pressure water jets. These operating characteristics make the unit suitable for motion systems that require sustained power, high rotational speed, and a compact mounting interface.
The motor’s holding brake is energized at 24 V, providing static holding torque that keeps vertical loads from drifting between operating cycles. The windings and frame insulation withstand a dielectric test of 1,500 VAC for one minute, while insulation resistance remains above 10 MΩ when measured at 500 VDC. These electrical values support reliable isolation between energized motor circuits and accessible frame surfaces. Heat generated during operation is removed through a self-cooling design, avoiding the need for an external blower. The internal shaft seal protects the bearing area from contaminants that could otherwise affect rotation or shorten bearing life. The flange mount provides a rigid connection to the machine structure, while the holding brake keeps the shaft stationary after motor power is removed.
