P50B07040DXV00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B07040DXV00 is a standard brushless servo motor from the P5 Super BL Servo Motors series. It provides a rated output of 400 W, operates at a maximum speed of 4500 min-1, and has a shaft diameter of 14 mm with a 76 mm flange size. The motor uses an absolute sensor for detection, has a self-cooling method, and features an IP55 protection rating.
Internal Product Review
The P50B07040DXV00 is a Sanyo Denki P5 Super BL servo motor with a brushless permanent-magnet design. Self-cooling construction and an IP55 protection rating support dependable operation in enclosed industrial equipment. An ABS-R II absolute sensor and 4500 min-1 maximum speed make the unit a strong choice for responsive servo motion.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07040DXV00 is a brushless AC servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. Designed as a standard motor, it serves positioning tables, pick-and-place heads, and other industrial axes that rely on tight speed regulation and repeatable motion profiles. By combining a compact design with low inertia, the unit translates drive commands into controlled shaft rotation for automated assembly, packaging, and inspection equipment.
The motor has a rated mechanical output of 400 W, and the rotor can reach a top speed of 4500 rpm when supplied by a compatible drive. A square flange measuring 76 mm simplifies attachment to gearheads or machine frames, while a shaft diameter of 14 mm accommodates standard couplings. The housing has an IP55 protection rating, helping prevent harmful dust accumulation and protecting the motor against low-pressure water jets. Motion feedback is provided by an ABS-R II absolute sensor, and a permanent-magnet excitation system generates torque through the rotor. The motor uses natural convection for self-cooling, eliminating the need for a separate blower or liquid-cooling circuit. A shaft seal helps protect the bearings from coolant mist, while the absence of a holding brake allows the shaft to be back-driven when power is removed.
The stator belongs to the 200 VAC class and includes a supercapacitor that preserves the control power needed for encoder memory. Winding insulation has a dielectric withstand rating of 1500 VAC for one minute and an insulation resistance of at least 10 MΩ at 500 VDC. Continuous operation is permitted at ambient temperatures up to 40 °C, while storage is permitted at temperatures up to 65 °C. Relative humidity must not exceed 90% RH under the stated operating and storage conditions. These limits help prevent condensation and insulation degradation when the motor is installed in factory automation equipment. Adequate clearance around the housing should be maintained so heat can dissipate without forced airflow.
