P50B07040DXSS5 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B07040DXSS5 is part of the P5 Super BL Servo Motors series. This brushless motor operates at 200 VAC and has a rated output of 400 watts with a rated speed of 3,000 min-1. It features a wiring-saved incremental encoder with a resolution of 2,000 pulses per revolution, and a protection rating of IP55.
Internal Product Review
The P50B07040DXSS5 is a Sanyo Denki P5 Super BL servo motor with 400 W rated output and 200 VAC operation. A 1/5 gear ratio paired with 4.8 N·m rated output torque gives the unit strong low-speed drive characteristics for indexing and transfer axes. IP55 protection adds welcome durability in plant environments, making this motor a very capable geared servo package.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07040DXSS5 is a geared servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. It combines a brushless AC motor with a factory-mounted gear stage, allowing the unit to deliver controlled rotary motion at reduced speed and increased torque. This configuration is suitable for automated loaders, conveyors, and lightweight positioning fixtures where compact dimensions and repeatable accuracy are required. The integrated arrangement also reduces the need for a separate gearbox and simplifies mechanical installation within space-limited machinery.
A wiring-saving incremental encoder with a resolution of 2,000 P/R sends position data to the drive through a simplified connection, reducing cabling requirements in the control cabinet. The stator operates from a nominal 200 VAC supply, and continuous phase current is limited to 3.0 Arms, allowing operation with a compatible 200-volt servo amplifier. The rotor reaches a rated speed of 3,000 rpm, and the 1/5 reduction produces an output speed of 600 rpm for indexing duties. The gearbox has an efficiency of 75%, meaning three-quarters of the motor’s mechanical power is transferred through the gear stage. Housing joints and the terminal area meet the IP55 rating, providing protection against dust and water jets on the production floor. A 76 mm square flange aligns with a 90 × 90 mm gearbox face, allowing direct attachment to compatible machine frames. The motor has a rated torque of 1.274 N·m, while its brushless design reduces routine maintenance requirements.
Total continuous output is 400 W, while the geared output delivers a continuous torque of 4.8 N·m under rated operating conditions. A peak stall torque of 3.92 N·m supports rapid acceleration, and a maximum mechanical speed of 4,500 rpm provides additional speed capacity for brief operating cycles. Backlash is limited to 2 arcmin, helping maintain positioning accuracy after repeated direction reversals. The motor does not include a holding brake, so an external clamp or drive-applied torque must secure vertical loads when power is removed.
