P50B07040DXS000T Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B07040DXS000T is part of the P5 Super BL Servo Motors series and features a 400 W brushless motor. It is equipped with a wiring-saved incremental encoder and a backlashless planetary gear with a gear ratio of 1/11. This standard motor has a flange size of 76 mm and a maximum speed of 4500 min-1.
Internal Product Review
The P50B07040DXS000T is a Sanyo Denki servo motor with 400 W rated output and a backlash-less planet gear. Brushless motor technology and a wiring-saved incremental encoder give the package efficient operation and straightforward feedback integration. A 4500 min-1 max speed makes the assembly especially appealing for responsive geared motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07040DXS000T is a servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. As a brushless actuator intended for closed-loop position and velocity control, it converts drive commands into precise rotary motion for pick-and-place axes, indexing tables, and compact conveying stages in automated machinery. The motor installs on a machine through a square flange and works with Sanyo Denki’s P5 drive platform, allowing coordinated multi-axis motion with few external components. Its compact format makes it suitable for equipment that requires accurate movement within a limited installation area.
This model delivers a continuous mechanical output of 400 W, allowing the shaft to supply four-tenths of a kilowatt to an attached load during normal operation. Its maximum permissible speed is 4500 rpm, providing the upper operating limit for rapid traverses. A mounting interface measuring 76 mm secures the stator to the machine frame and helps align the gearbox pilot. The electromagnetic assembly uses a brushless motor design with electronic commutation, eliminating brush wear and reducing routine maintenance. Rotor position feedback is provided by a wiring-saved incremental encoder. Its integrated signal distribution reduces the number of feedback conductors that must pass through cable tracks, which simplifies routing in moving machine sections.
Torque multiplication is provided by a 1/11 reduction ratio, allowing the motor to operate at high speed while delivering lower-speed, higher-torque motion at the load. The reducer uses a backlash-free planetary gear set, minimizing lost motion when the drive reverses direction during positioning cycles. The motor is supplied with no holding brake, so vertical axes must rely on an external clamp or continuous servo torque to prevent movement when power is removed. The product has no certification under an applicable standard, so the completed machine must be evaluated for compliance with relevant local electrical and safety requirements. Appropriate protective devices and operating controls should therefore be selected for the installation in which the motor is used.
