P50B07040DXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B07040DXS00 is a standard motor from the P5 Super BL Servo Motors series, featuring brushless technology and a rated output of 400 W. It has a 76 mm flange size and a maximum speed of 4500 min-1. This model uses a wiring-saved incremental encoder and does not come equipped with a holding brake.
Internal Product Review
The P50B07040DXS00 is a Sanyo Denki P5 Super BL servo motor with 400 W rated output and brushless motor technology. A wiring-saved incremental encoder supports clean feedback integration, and 4500 min-1 max speed gives the unit strong dynamic response. Standard motor design and the absence of a holding brake make this model a practical choice for streamlined servo axes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07040DXS00 is a servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. This model is engineered for integration into industrial automation axes where precise velocity and position control are required. By combining permanent-magnet excitation with electronic commutation, the motor converts drive current into controlled torque. Its built-in position detector provides feedback to the motion controller, allowing the system to monitor movement and correct deviations during operation.
This unit delivers a continuous mechanical output of 400 W, allowing use in mid-range power applications such as small pick-and-place heads or conveyor zones. The peak shaft speed reaches 4500 rpm, so motion profiles that require rapid indexing can be executed without mechanical gear multiplication. The square flange measures 76 mm, providing a standardized interface for gearboxes or direct-drive mounting plates. Internally, the rotor and stator use brushless motor technology, eliminating brush wear and reducing maintenance requirements. Rotor position is tracked by a wiring-saving incremental encoder, which transmits digital feedback through fewer conductors than traditional incremental devices. This encoder arrangement simplifies cable routing in compact machine frames while preserving the feedback needed for closed-loop control.
The shaft has no holding brake, so a mechanical clamping device or drive-generated torque must secure vertical loads when power is removed. The unit has a standard motor configuration without special winding or cooling modifications. Thermal management relies on natural convection under normal installation conditions, so sufficient space around the housing is necessary for heat dissipation. The internal designation of P5 motor identifies its platform and supports the use of matching drive parameters and mechanical interfaces within the P5 product line. Its combination of moderate continuous power, compact flange dimensions, and high peak speed is suitable for multi-axis assembly cells, inspection equipment, material-handling systems, and other automated machinery that requires repeatable motion.
