Product Description:

The P50B07030PXS00 is a servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. Built for closed-loop motion control, this motor interfaces with a matching drive. It delivers precise angular positioning, velocity regulation, and continuous torque in industrial automation cells, conveyors, and pick-and-place equipment.

The motor has a rated output of 300 W, meaning the shaft can supply 0.3 kW of mechanical power under continuous duty. At a rated speed of 3,000 rpm, this output provides the torque needed for mid-frame indexing axes. Feedback is provided by an optical encoder with a resolution of 2,000 P/R; each revolution is divided into 2,000 pulses so the controller can resolve 0.18 degrees per count. The encoder uses an incremental wiring-saving design, combining power, A/B/Z channels, and alarm lines in a single compact connector to reduce cable bulk. Thermal regulation relies on a fully enclosed, self-cooled design. The housing forms a sealed path that transfers heat away from the stator without external fans, allowing installation in dusty environments.

The permanent-magnet excitation system supports a peak speed of 4,500 rpm for rapid traverses when short cycle times are required. The enclosure has an IP55 protection rating, guarding internal components against limited dust ingress and low-pressure water jets. Mounting is provided by a square flange measuring 76 mm across, enabling direct coupling to gearboxes or machine frames without adapter plates. Dynamic stability meets vibration grade V15, permitting operation on moving bases or lightly reinforced structures. The motor is intended for continuous service and can remain energized throughout production shifts without a cool-down interval. Its enclosed housing also helps prevent airborne debris from reaching sensitive internal parts during normal operation.