P50B07030DXPCHM Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B07030DXPCHM is a brushless servo motor from the P5 Super BL Servo Motors series with a rated output of 300 W and a supply voltage of 200 VAC. It features an IP55 protection class, supports a maximum speed of 4500 min-1, and has a flange size of 76 mm with an overall length of 103 mm. The motor has a rated torque of 0.931 N·m and a shaft diameter of 14 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07030DXPCHM is a brushless AC servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. As a compact rotary actuator, it converts the controlled output of a 200 VAC drive into precise shaft motion for positioning tables, pick-and-place arms, and other closed-loop axes in industrial automation. Its IP55 enclosure and CE and UL approvals support installation in production environments that require protection against contaminants and compliance with recognized safety standards.
The motor operates with 200 VAC three-phase power and draws a rated armature current of 2.2 Arms while delivering a continuous output of 300 W. At that operating point, it produces 0.931 N·m of torque at a rated speed of 3,000 rpm, providing the primary values used to select a compatible drive and gear ratio. A torque constant of 0.483 N·m/Arms relates commanded current to shaft torque, while the phase resistance of 2.9 Ω affects drive voltage utilization. Response is supported by an electrical time constant of 3.8 ms and a mechanical time constant of 1.8 ms, allowing rapid acceleration under changing loads. The enclosure meets IP55, protecting the stator windings against limited dust ingress and low-pressure water jets. A 76 mm flange allows the frame to connect to compatible mounting interfaces without an adapter.
The motor provides a 2.94 N·m peak stall torque for brief periods during startup or while resisting external disturbances. This torque is supported by a 7.5 Arms peak stall current from the amplifier. The square housing has an overall length of 103 mm, keeping the required installation depth moderate. A 14 mm shaft diameter provides a solid coupling surface for compatible keyed hubs. The rotor can reach a maximum operating speed of 4,500 rpm during high-speed motion cycles. Because the motor is supplied without a holding brake, an external mechanical restraint must secure vertical loads when power is removed.
