P50B07030DCLKP Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B07030DCLKP is a brushless servo motor from the P5 Super BL Servo Motors series, featuring a rated output of 300 W and a flange size of 76 mm. It is equipped with a holding brake requiring 24V at 0.3 A and delivers a continuous stall torque of 0.98 N·m. The motor supports a maximum speed of 4500 min-1 and a rated speed of 3000 min-1.
Internal Product Review
The P50B07030DCLKP is a Sanyo Denki P5 Super BL servo motor featuring brushless motor technology and a rated output of 300 W. Rated torque of 0.931 N·m and maximum speed of 4500 min⁻¹ give the motor strong dynamic performance for precise motion control. The integrated 24 V holding brake adds valuable axis retention, making the brake-equipped design a standout feature.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07030DCLKP is a brushless AC servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. It converts drive current into precise rotary motion for pick-and-place axes, indexing tables, and similar industrial automation equipment. Closed-loop positioning and velocity control allow the motor to follow commanded motion profiles while correcting deviations caused by changing loads.
At its nominal operating point, the motor delivers 300 W of mechanical power while turning at 3000 rpm. The corresponding shaft torque is 0.931 N·m, and the torque constant is 0.483 N·m/Arms. Stator copper loss is influenced by a winding resistance of 2.9 Ω, allowing thermal rise to remain predictable during prolonged operation. Continuous stall torque is 0.98 N·m, providing additional capacity for static holding demands. An electrical time constant of 3.8 ms supports rapid current buildup, while a mechanical time constant of 1.8 ms allows responsive rotor acceleration. The rated power rate is 17.7 kW/s, supporting rapid point-to-point movement when the connected drive is tuned for the motor and load.
The rotor can reach a peak speed of 4500 rpm, extending the available operating range beyond its nominal speed. Short-term torque can rise to 2.94 N·m to accommodate acceleration loads and brief demand changes. A factory-installed holding brake operates at 24 V, draws 0.3 A, and adds 0.57 kg to the assembly. Its added inertia is 0.245 × 10⁻⁴ kg·m², which should be considered when calculating acceleration and deceleration response. The brake locks the shaft when supply power is removed, helping prevent back-driving when the motor is installed on a vertical axis. A square 76 mm mounting flange supports attachment to compatible gearbox interfaces and machine-frame adapters. The flange shape provides a stable mounting surface, while the brake supports controlled load retention whenever drive torque is unavailable.
