Product Description:

The P50B07020DXX4ZE is a brushless AC servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. Designed for closed-loop position and velocity control, the unit converts drive commands into rapid, precise shaft movement for pick-and-place heads, indexing tables, and packaging axes. Its electrical design is compatible with common servo amplifiers, and the CE mark permits installation in machinery sold within the European Economic Area.

The motor is energized from a 200 VAC three-phase bus and delivers a rated mechanical output of 200 W at a shaft speed of 3,000 rpm while producing 0.637 N·m of rated torque. An IP55 enclosure protects the stator against dust ingress and low-pressure water jets, while Class F insulation withstands winding temperatures up to 155 °C. The brushless design eliminates commutator wear, and a phase resistance of 2.5 Ω supports efficient current regulation. An electrical time constant of 3.6 ms enables a rapid response to changes in the drive command. The power rate is 10.6 kW/s, supporting responsive operation while maintaining adequate thermal capacity during continuous duty.

Continuous stall torque reaches 0.686 N·m, giving the drive enough capacity to hold static loads without overheating, and peak stall torque reaches 1.96 N·m during short acceleration periods. A mechanical time constant of 2.4 ms combines with a torque constant of 0.348 N·m/Arms to provide smooth current-to-torque response. The square flange measures 76 mm across and accommodates compatible gearheads. The output shaft has a diameter of 14 mm, allowing direct connection to appropriately sized keyed hubs and couplings. The maximum speed is 4,500 rpm, extending the available velocity range beyond the rated operating point. The motor is supplied without a holding brake, so applications that require stationary load retention must use drive-applied torque or an external clamping device.